Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: TD5 00 turning circle

  1. #1
    Join Date
    Nov 2006
    Posts
    68
    Total Downloaded
    0

    TD5 00 turning circle

    Saw a thread some time ago about reducing the turning circle significantly on TD5 by purchasing new stoppers.

    I'm about to purchase these parts and install but want some more feedback if anyone else has done this. I have 16" rims on my 00 disco.

    thanks

  2. #2
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,035
    Total Downloaded
    0
    It provides a significant improvement.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa

  3. #3
    Join Date
    Jan 1970
    Location
    South Yundreup,WA.
    Posts
    7,468
    Total Downloaded
    0
    More info?? What parts and is this for both Discos and Fenders or just Discos?
    Ta
    CraigE
    2011 Discovery 4 TDV6
    2009 DRZ400E Suzuki
    1956 & 1961 P4 Rover (project)
    1976 SS Torana (project - all cash donations or parts accepted)
    2003 WK Holden Statesman
    Departed
    2000 Defender Extreme: Shrek (but only to son)
    84 RR (Gone) 97 Tdi Disco (Gone)
    98 Ducati 900SS Gone & Missed

    Facta Non Verba

  4. #4
    Join Date
    May 2003
    Location
    On The Road
    Posts
    30,031
    Total Downloaded
    0
    there was a post just recently on this Craig,, part numbers, pricing, the works,,, just cant remember who the kind soul was,,,
    edit; for disco2
    edit2; 27mm down to 21mm or something like that---
    "How long since you've visited The Good Oil?"

    '93 V8 Rossi
    '97 to '07. sold.
    '01 V8 D2
    '06 to 10. written off.
    '03 4.6 V8 HSE D2a with Tornado ECM
    '10 to '21
    '16.5 RRS SDV8
    '21 to Infinity and Beyond!


    1988 Isuzu Bus. V10 15L NA Diesel
    Home is where you park it..

    [IMG][/IMG]

  5. #5
    Join Date
    Jan 1970
    Location
    Manly QLD
    Posts
    1,452
    Total Downloaded
    0
    For D2 the LR part number is FTC5151 you will need 2.
    L322 3.6TDv8 Lux

  6. #6
    Join Date
    May 2003
    Location
    On The Road
    Posts
    30,031
    Total Downloaded
    0
    Thanks harlie

    D2 Turning Circle


    could've sworn there was a measurement,,,,
    "How long since you've visited The Good Oil?"

    '93 V8 Rossi
    '97 to '07. sold.
    '01 V8 D2
    '06 to 10. written off.
    '03 4.6 V8 HSE D2a with Tornado ECM
    '10 to '21
    '16.5 RRS SDV8
    '21 to Infinity and Beyond!


    1988 Isuzu Bus. V10 15L NA Diesel
    Home is where you park it..

    [IMG][/IMG]

  7. #7
    Join Date
    Jan 1970
    Location
    Manly QLD
    Posts
    1,452
    Total Downloaded
    0
    Call me tight - but I just cut mine down, took less than 10 min to remove, cut, finish, refit and paint.
    L322 3.6TDv8 Lux

  8. #8
    Join Date
    May 2003
    Location
    On The Road
    Posts
    30,031
    Total Downloaded
    0
    did you take a measurement harlie?
    "How long since you've visited The Good Oil?"

    '93 V8 Rossi
    '97 to '07. sold.
    '01 V8 D2
    '06 to 10. written off.
    '03 4.6 V8 HSE D2a with Tornado ECM
    '10 to '21
    '16.5 RRS SDV8
    '21 to Infinity and Beyond!


    1988 Isuzu Bus. V10 15L NA Diesel
    Home is where you park it..

    [IMG][/IMG]

  9. #9
    Join Date
    Jan 1970
    Posts
    41
    Total Downloaded
    0
    Technical Bulletin 0026 CDS …. ref L8867bu …. & the 23mm lock stops. (manovering in tight spaces)

    [FONT='Times New Roman','serif']Just a note to tell you all that ten minutes work can change the poor turning circle on the 2003 model to the same as a tdi. This is a service bulletin from Land rover to all Dealers stating that the 29mm streering lock stops can be changed for 23mm stops, thus improving the turning circle 9 inches for every mm taken off the stops.[/FONT]

    [FONT='Times New Roman','serif']Cheers Aston[/FONT]

  10. #10
    Join Date
    Nov 2006
    Location
    Alice Springs, Australia
    Posts
    360
    Total Downloaded
    0
    Anyone know if this mod can be fitted to a fender? my old girl could do with all the help she can get in the steering department.
    Cheers from the Desert
    Rexy
    2000 130 TD5
    Oil in the Harness, suspension knock, transmission clunk, engine oil leaks, exhaust manifold leaks, centrifugal oil filter stripped bolts, a/c leaks, door leaks, wouldn't trade it for the world

Page 1 of 2 12 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!