Hi Bazzle, thanks, that seems reasonable. Can you tell me where you had it done or do you know of any gurus in SA I could get it done at?
I'm in Townsville and recentley had a leaking 300 tdi injector pump ( throttle shaft) and cost $750 to replace all seals and calibrate. With me removing pump and refitting. This is not a big deal to do if you have a manual. drive in and out quoted $ 950 + parts.
Hi Bazzle, thanks, that seems reasonable. Can you tell me where you had it done or do you know of any gurus in SA I could get it done at?
I will chase down the name and let you know contact details.
Bruce davis did mine, but that cost $2500 cause it was totally knackered inside. If the casing of mine had been usable it would have cost $1200 exchange back in 2008 and that included the Bruce Davis fuel pump tweek to up the power a bit.
Matt
The 4wd Zone/Opposite Lock Bathurst
263 Stewart Street, Bathurst, NSW
http://www.the4wdzone.com.au/
Discounts for AULRO members, just shoot me a PM before you purchase.
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks