Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 24

Thread: TD5 Brittle Hose WARNING

  1. 11th December 2008, 06:16 AM #11
    feral's Avatar
    feral
    feral is offline Wizard
    Join Date
    Jan 1970
    Location
    Melbourne
    Posts
    1,006
    Total Downloaded
    0
    Quote Originally Posted by FenianEel View Post
    A hole less than a pin*****............

    Oh Fen....circumventing the swear filter again. Looks like you will be taking a ride on the bus


    Seriously the hose does get brittle and I ended up snapping mine when I had a little difficulty removing the air filter cover. At 160,000 k's service it probably deserved to be changed anyway.

    If you do your homework and use a discount LR supplier the tube is very cheap. Just don't be horrified when you go and pick it up. The amount of flexability in the new hose is beyond belief. Concertina fold is not the word.
    Reply With Quote Reply With Quote
  2. 11th December 2008, 06:23 AM #12
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,497
    Total Downloaded
    0
    Quote Originally Posted by LandyAndy View Post
    For you TD5 owners SERIOUSLY consider replacing the plactic return hose from the overflow bottle to the radiator.
    Mine was brittle,I snapped it TWICE just brushing against it on the "hot" side of the engine.Over on the Overflow bottle side I couldnt snap it trying to!!!! I replaced it with a flexible hose.
    Andrew
    chances of a pic of the location of the culprit hose perchance?
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  3. 11th December 2008, 09:09 AM #13
    Redback's Avatar
    Redback
    Redback is offline Swaggie Subscriber
    Join Date
    Jan 1970
    Location
    Ellendale Tasmania.
    Posts
    12,986
    Total Downloaded
    0
    I wish you blokes wouldn't do this, i get the same thing happen to me not long after

    CUT IT OUT YA HEAR

    Baz
    Cheers Baz.

    2011 Discovery 4 SE 2.7L
    1990 Perentie FFR EX Aust Army
    1967 Series IIa 109 (Farm Truck)
    2007 BMW R1200GS
    1979 BMW R80/7
    1983 BMW R100TIC Ex ACT Police
    1994 Yamaha XT225 Serow
    Reply With Quote Reply With Quote
  4. 11th December 2008, 02:51 PM #14
    Tyrepower's Avatar
    Tyrepower
    Tyrepower is offline Master
    Join Date
    Jan 1970
    Location
    Perth
    Posts
    727
    Total Downloaded
    0
    Landy Andy that Black Cow seems to still be giving you grief. Mine touch wood still runs like a train. Getting some new shocks in the next couple of weeks ready for a trip on the CSR in July 09. Other than that no problems. However will be looking at "all" the hoses now.
    Cheers
    Reply With Quote Reply With Quote
  5. 11th December 2008, 04:19 PM #15
    Bundalene's Avatar
    Bundalene
    Bundalene is offline ChatterBox Gold Subscriber
    Join Date
    May 2008
    Location
    Horsley Park, Sydney
    Posts
    2,939
    Total Downloaded
    0
    The prevoius post prompted me to check out the hose. I replaced it immediately - almost worn through at 2 spots.

    As suggested in an earlier post - probably a good idea to replace regardless.

    Erich.
    Reply With Quote Reply With Quote
  6. 11th December 2008, 04:23 PM #16
    FenianEel's Avatar
    FenianEel
    FenianEel is offline ChatterBox
    Join Date
    Jan 1970
    Location
    Alex Heads
    Posts
    2,932
    Total Downloaded
    0
    Quote Originally Posted by Blknight.aus View Post
    chances of a pic of the location of the culprit hose perchance?
    I have some....somewhere round ere
    Reply With Quote Reply With Quote
  7. 11th December 2008, 04:34 PM #17
    stevo's Avatar
    stevo
    stevo is offline Wizard Supporter
    Join Date
    Jan 1970
    Location
    Pennant Hills, Sydney
    Posts
    1,415
    Total Downloaded
    0
    And don't forget about that small hose that goes to the engine oil cooler that lives behind the turbo, one end is 3/4 and the other is 5/8 from memory so not something that is easy to replace.
    disco seriesII mods so far:-bullbar,hyd winch,
    detriot locker,lsd front,C.D.L kit,chipped and bigger intercooler,2" lift,rock sliders, lsd in transfer case, modified auto trans.

    In the event of nuclear war,Disregard this message
    Reply With Quote Reply With Quote
  8. 11th December 2008, 08:53 PM #18
    Bytemrk's Avatar
    Bytemrk
    Bytemrk is offline ForumSage Silver Subscriber
    Join Date
    Oct 2003
    Location
    Montrose, Vic.
    Posts
    5,417
    Total Downloaded
    0
    I had a similar problem on V8, snapped the hose in 3 places


    I was on Fraser Island at the time..... god I'm glad I carry some spare fuel line and hose clamps in the toolbox.. patched it up to get me home...

    Mark
    Mark

    Of all the things I've lost, I miss my mind the most

    2015 TDV6 D4.... the latest project... Llams, Traxide, Icom 455, Tuffant Kimberleys and Mofos.... so far.
    2012 SDV6 SE D4 with some stuff... gone...
    2003 D2a TD5...gone...
    2000 D2 V8...gone...
    https://bymark.photography

    Reply With Quote Reply With Quote
  9. 22nd June 2012, 09:25 AM #19
    haydent's Avatar
    haydent
    haydent is offline Wizard Supporter
    Join Date
    Jul 2009
    Location
    Mid North Coast, NSW
    Posts
    1,094
    Total Downloaded
    51.4 KB
    just snapped mine by leaning on it...
    Reply With Quote Reply With Quote
  10. 22nd June 2012, 09:31 AM #20
    haydent's Avatar
    haydent
    haydent is offline Wizard Supporter
    Join Date
    Jul 2009
    Location
    Mid North Coast, NSW
    Posts
    1,094
    Total Downloaded
    51.4 KB
    Rave:
    Excess coolant created by heat expansion is returned to the expansion tank from the radiator bleed pipe at the top of
    the radiator.
    Reply With Quote Reply With Quote
Page 2 of 3 FirstFirst 123 LastLast
« 2002 discovery TD5 in Sydney - no remote and other | TD5 Discovery Auto Tans service around Liverpool NSW ? »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!