There was much discussion by both mates about a more sophisticated control and fill system and others have also worked on this glitch with some claiming success and publishing the basic electronics to build such a system although with the 2 I saw published there was nothing done about the heat or the initial current draw and most advocated 3 and 4 lt cannisters being 4 inches wide by a few feet deep with the breeder elements in the bottom half of the cannister.
I do think these things work and ive heard credible claims of a guy near lakes entrance running a datsun 1200 ute on Hydrogen for all but the initial 5 mins but without a good commercial breeder and control devices its just a fun way to spend a few days and 4 to 700 dollars.
The safety is also suspect as hell.
So unless you are very good with digital/analogue electronics and are dead serious about spending a few hundred hours working out bugs to drive what I see as a ticking bomb id give it a miss...
Oh and you also need a **** load of room under the bonnet and good air flow.
Cheers,
Tony


Reply With Quote

but lots of steam
. 
Bookmarks