There was much discussion by both mates about a more sophisticated control and fill system and others have also worked on this glitch with some claiming success and publishing the basic electronics to build such a system although with the 2 I saw published there was nothing done about the heat or the initial current draw and most advocated 3 and 4 lt cannisters being 4 inches wide by a few feet deep with the breeder elements in the bottom half of the cannister.
I do think these things work and ive heard credible claims of a guy near lakes entrance running a datsun 1200 ute on Hydrogen for all but the initial 5 mins but without a good commercial breeder and control devices its just a fun way to spend a few days and 4 to 700 dollars.
The safety is also suspect as hell.
So unless you are very good with digital/analogue electronics and are dead serious about spending a few hundred hours working out bugs to drive what I see as a ticking bomb id give it a miss...
Oh and you also need a **** load of room under the bonnet and good air flow.
Cheers,
Tony


 
						
					 
					
					 
				
				
				
					 Reply With Quote
  Reply With Quote 
						
					
 Originally Posted by Blknight.aus
 Originally Posted by Blknight.aus
					
 
				 
						
					 but lots of steam
 but lots of steam  .
 .  
						
					
Bookmarks