Page 1 of 3 123 LastLast
Results 1 to 10 of 27

Thread: dual mass flywheels......

  1. 20th February 2010, 10:16 PM #1
    DEFENDERZOOK's Avatar
    DEFENDERZOOK
    DEFENDERZOOK is offline OldBushie
    Join Date
    Jan 1970
    Location
    SYDNEY -in the shire.....
    Posts
    8,196
    Total Downloaded
    0

    dual mass flywheels......

    hey guys.....
    who has had experience with dual mass flywheels.......?

    im looking to find out what sort of symptoms can be expected from a faulty one.......

    i know my clutch is palying up......but what should i expect if theres a problem with the flywheel......


    03 Td5 fender.....
    Reply With Quote Reply With Quote
  2. 20th February 2010, 10:19 PM #2
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,497
    Total Downloaded
    0
    shuddery pick up to near if not total loss of drive, noise and vibrations at certain revs.

    my advice is if you're doing a clutch on a td5 you change the flywheel and engine mounts all in one go.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  3. 20th February 2010, 10:25 PM #3
    LandyAndy's Avatar
    LandyAndy
    LandyAndy is offline RoverLord Gold Subscriber
    Join Date
    Feb 2004
    Location
    Williams West Aust
    Posts
    20,998
    Total Downloaded
    0
    Is it just the growl from the spigot bearing till warmed up???
    I have also had a few push the pedal in and extremely rough vibes,a sign of the dual mass giving up Im told.
    Since chipping it slips the clutch easy,expected for 245000ks.
    I have great difficulty in doing hillstarts when loaded up,engine dont want to spool up from low revs,slip the pedal and the clutch smells like its cooking.Rear mainseal should be done at the same time.
    Parts arnt as dear as one would think considering its a flywheel and crutch kit needed.
    Andrew
    DISCOVERY IS TO BE DISOWNED
    Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
    Snow White MY14 TDV6 D4
    Alotta Fagina MY14 CAT 12M Motor Grader
    2003 Stacer 525 Sea Master Sport
    I made the 1 millionth AULRO post
    Reply With Quote Reply With Quote
  4. 20th February 2010, 10:33 PM #4
    DEFENDERZOOK's Avatar
    DEFENDERZOOK
    DEFENDERZOOK is offline OldBushie
    Join Date
    Jan 1970
    Location
    SYDNEY -in the shire.....
    Posts
    8,196
    Total Downloaded
    0
    wow....that was quick......


    loss of drive from a flywheel......now thats interesting.......

    ive got the shudder......then it just locks with a jolt and all is good.....
    feels like just a clutch plate........


    but i havent had any experience with DMF.........if i use a few more revs on take off and ride the clutch a tad longer than normal.....
    i can take off without any shudder......

    but i cant do anything just yet cos i need the car to go on a trip in a couple of weeks......
    then i can take it off the road for some reairs......
    Reply With Quote Reply With Quote
  5. 20th February 2010, 10:36 PM #5
    LandyAndy's Avatar
    LandyAndy
    LandyAndy is offline RoverLord Gold Subscriber
    Join Date
    Feb 2004
    Location
    Williams West Aust
    Posts
    20,998
    Total Downloaded
    0
    What you just described is the same as my D2.
    I have been babying it for a few months,not doing any 4x4.
    Will PM you.
    Andrew.
    DISCOVERY IS TO BE DISOWNED
    Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
    Snow White MY14 TDV6 D4
    Alotta Fagina MY14 CAT 12M Motor Grader
    2003 Stacer 525 Sea Master Sport
    I made the 1 millionth AULRO post
    Reply With Quote Reply With Quote
  6. 20th February 2010, 10:38 PM #6
    DEFENDERZOOK's Avatar
    DEFENDERZOOK
    DEFENDERZOOK is offline OldBushie
    Join Date
    Jan 1970
    Location
    SYDNEY -in the shire.....
    Posts
    8,196
    Total Downloaded
    0
    Quote Originally Posted by LandyAndy View Post
    Is it just the growl from the spigot bearing till warmed up???
    I have also had a few push the pedal in and extremely rough vibes,a sign of the dual mass giving up Im told.
    Since chipping it slips the clutch easy,expected for 245000ks.
    I have great difficulty in doing hillstarts when loaded up,engine dont want to spool up from low revs,slip the pedal and the clutch smells like its cooking.Rear mainseal should be done at the same time.
    Parts arnt as dear as one would think considering its a flywheel and crutch kit needed.
    Andrew


    parts aint cheap either......

    i was thinking of getting rid of the DMF and just fitting some type of standard flywheel......
    will work it all out if and when i manage to pull it all apart......
    Reply With Quote Reply With Quote
  7. 21st February 2010, 01:16 AM #7
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,497
    Total Downloaded
    0
    check the fuel pressure regulator
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  8. 21st February 2010, 06:47 AM #8
    wayne
    wayne is offline Master
    Join Date
    Jun 2006
    Location
    Karalee Ipswich
    Posts
    271
    Total Downloaded
    0
    Quote Originally Posted by DEFENDERZOOK View Post
    wow....that was quick......


    loss of drive from a flywheel......now thats interesting.......

    ive got the shudder......then it just locks with a jolt and all is good.....
    feels like just a clutch plate........


    but i havent had any experience with DMF.........if i use a few more revs on take off and ride the clutch a tad longer than normal.....
    i can take off without any shudder......

    but i cant do anything just yet cos i need the car to go on a trip in a couple of weeks......
    then i can take it off the road for some reairs......
    If its any help mines been shuddering for close on 2 years have done victorian high country Coffs harbour fraser island numerous times and lots of smaller trips
    Cheers Wayne
    Reply With Quote Reply With Quote
  9. 21st February 2010, 06:49 AM #9
    wayne
    wayne is offline Master
    Join Date
    Jun 2006
    Location
    Karalee Ipswich
    Posts
    271
    Total Downloaded
    0
    Quote Originally Posted by Blknight.aus View Post
    check the fuel pressure regulator
    Hey Dave could you please expand on this comment.
    Cheers Wayne
    Reply With Quote Reply With Quote
  10. 21st February 2010, 07:01 AM #10
    wayne
    wayne is offline Master
    Join Date
    Jun 2006
    Location
    Karalee Ipswich
    Posts
    271
    Total Downloaded
    0
    Quote Originally Posted by DEFENDERZOOK View Post
    parts aint cheap either......

    i was thinking of getting rid of the DMF and just fitting some type of standard flywheel......
    will work it all out if and when i manage to pull it all apart......
    I sent the following info to Justin C many months ago.This mob make a clutch kit for the TD5 thats not a DMF.Ask Justin C if he has used them he may be able to give you a bit of feed back.I gathered this info thinking my DMF was going to die soon.
    Hi Justin the guys name is Doug 07 32779403
    the business name is Nicks Performance Clutches the price $1250.00
    I have only spoken to the guy over the phone so I dont Know if the product is any good    .


    Cheers Wayne
    Reply With Quote Reply With Quote
Page 1 of 3 123 LastLast
« HELP!! TD5 Part | Power Steer Convert - which Column Fits Series Firewall »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!