Reply With QuoteWhat else would be needed to bolt this up to my lt95->Isuzu bell housing?Originally Posted by flagg
YarnMaster
SubscriberYeah the combination of that engine and the ex rfs 130 in eBay is very very tempting! If the 140 was closer....
Hercules: 1986 110 Isuzu 3.9 (4BD1-T)
Brutus: 1969 109 ExMil 2a FFT (loved and lost)
Master
What else would be needed to bolt this up to my lt95->Isuzu bell housing?
TopicToaster
SubscriberLandrover Isuzu type LT95 bell housing and also the Landrover flywheel housing from an Isuzu landie.
Steve
1985 County - Isuzu 4bd1 with HX30W turbo, LT95, 255/85-16 KM2's
1988 120 with rust and potential
1999 300tdi 130 single cab - "stock as bro"
2003 D2a Td5 - the boss's daily drive
Master
i have the correct bellhousing. I am guessing the flywheel housings are hard/impossible to get hold of? Any have one/know where i can get hold of one?
Master
SupporterArmy 110 on gumtree for $10,963. He reckons it is what he paid at auction plus $200.
ChatterBox
I've been seeing a number of ex-army 110 for sale ads at "my cost at auction" prices, and some seem to be genuinely priced... could this mean the shine is wearing off for some would be ex-mil 110 owners?
Master
Doesn't supprise me in the slightest
The look sound drive awesome then you realise you can't get into the local shops carpark because the carbays are designed with powersteering in mind and forget about that underground carpark in the city you'll need to park far away in a side street.
Anyway atleast you won't be able to here the other occupants of the vehicle complain over the sound of the engine.
TopicToaster
It's in the AULRO markets too, with a reasonable enough answer as to why it's for sale already...and since he bought three and is only selling one...
Master
This is now mine
Plan is to fit a Borgwarner EFR6258 and intercool.
Picking it up on saturday morning. Now time to accumulate all the bits i need to fit it to the 6x6!
This week I also splashed out on ashcroft 4.1s. (1 rover and 2 salisbury.)
and this number plate:
My wallet hurts.
YarnMaster
This is now mine
Plan is to fit a Borgwarner EFR6258 and intercool.
Picking it up on saturday morning. Now time to accumulate all the bits i need to fit it to the 6x6!
...You will most likely need to swap the flywheel housing from your 6x6, along with the starter, clutch slave cylinder, crankshaft bung, engine mounts and alternator.
You have options with the oil filters and thermostat housing.
None of those are going to add much time when you come to do the engine swap.
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks