Thread: Clutch Change - advice needed.

Originally Posted by Bush65

Sorry if my post created any confusion. I was replying to, and quoted Dougal.

I was specifically referring to clutches for an Isuzu truck engine and gearbox, because I knew that is what Dougal (and I) have. My Isuzu 6-speed uses the pressure plate with 29mm od x 21 spline hub (vs 25.5mm x 24 spline for Dougal's Isuzu 5 speed).

No problem whatsoever, I understood what you were saying. I was just clarifying the thread for anyone who may read it many moons down the track!

Jealous of you lucky sods with 6 speed bullet proof Isuzu boxes and 300mm clutches though!

Jon

Originally Posted by D3Jon

Was hoping to get the old girl back together this weekend, but I can't get hold of a friction plate in Perth for "love nor money", as they say.

Main dealer said 8 weeks, ex-UK and they can't resolve the part number of AYG34637 or AYG3463 to a modern equivalent. Said AYG numbers were Australian Army and not used anymore? No idea myself.

(Later): Well, thanks for all your help guys, I now have the correct clutch plate (AYG 3463) thanks to the extended efforts of Ian and Stuart at Rovacraft.

If you might be looking to "Stock up" to save problems in the future, there 2 LR Isuzu clutch kits on e-bay at the moment, this one is Pressure Plate 5312200240 + Clutch Plate AYG3616, and This one is Pressure Plate 5312200240 + Clutch Plate AYG3616 + throwout bearing. Interestingly, the seller says they suit 4 and 5 speeds, so I'd check spline count first before ordering.