Thread: Rijidij Tube Bull Bar, Defender, County

Originally Posted by rijidij

You'll find most winches will fit straight in to the bar, and it's usually pretty easy to find the actual dimensions online to make sure............

Warn Winch Dimensions

Ironman Winch Dimensions

Runva Winch Dimensions

There are some winches that wont fit without modification, like the Warn 12xe which has a cooling air pump at one end making it quite long, or super HD winches which have a larger diameter body and would require the grille to be cut.
Any winch that wont fit is likely to be more than required on your average Defender, but most 'standard' winches will fit.
There are various locations for the control boxes between brands, so it does pay to check dimensions, pictures etc online if you want to fit other items in the same space.

Cheers, Murray

Thanks Murray,

Those detailed dimension drawings help a lot.

Originally Posted by rijidij

Just shipped this non-winch Hybrid bar, looking forward to seeing pics of it fitted.



It has custom made mounts to suit the Lightforce LED180 driving lights.

Cheers, Murray

Hi Murray and everyone else,

Yep I am very stoked with this bar Murray made for me.

I should have the driving lights fitted on Wednesday sometime. Will post pics on this thread when finished.

I have pics of the bar fitted (sans lights) in my thread on Members Rides forum.

Thanks again Murray.

As promised, here is a quick pic of the LED180 driving lights in place, via the mounts Murray incorporated into my hybrid tube bar at my request.

I rushed it a bit as light was fading, so don't have a full width shot of the bar. However, a "full frontal" type shot is included on my Members Rides thread.

Thanks again Murray. I love the bar.

Cheers,

Couple of pics from today's fittings of some of Murray's products





Lightbars are still to be fitted.

Originally Posted by loneranger

Couple of pics from today's fittings of some of Murray's products .

Good to see everything arrived.

Nice looking fleet of Defenders there Mark.

Cheers, Murray

Hi

I went to Geelong area this last week - to meet up with a few friends but also to get my front bar fitted by Murray.

Thanks to Murray - a great customer experience.

I asked for a Non Winch Hybrid Bar with special Lightforce LED light fittings. Murray was great to deal with and I really appreciate the attention to detail and willingness to customise.

Here are a couple of photo's once I got back and cleaned of the bugs from the trip

The bar looks good.

I would be concerned that the vehicle is no longer ADR compliant as the hoop blocks the indicator lamp within the required viewing arc. This is why the ARB bull bars etc have the extra lamp set in the bar.

Originally Posted by tailslide

I would be concerned that the vehicle is no longer ADR compliant as the hoop blocks the indicator lamp within the required viewing arc. This is why the ARB bull bars etc have the extra lamp set in the bar.

Not sure I agree - the NSW Bull Bar Tolerances does not discuss a viewing arc for the indicators - only that the 'constituent members' need to fit around the light clusters - which is does. The drawings just show that the lights need to be visible from the front. There is also the indicator on the fender which whould help.