Thread: thinking of buying an ezytrail camper trailer

how much longer am i allowed to you keep you in suspense for?

so ran into a few small issues.
for the treg hitch, i bought a 2 inch drop tongue. it wasnt enough, turns out i need 7.5inch drop.


unknown to the salesman, even though the trailer is under 750kg, (tare 710kg) the trailer has electric brakes. i dont have a brake controller in the disco. I got a bit confused here. Apparently using the left indicator will activate the trailers brakes. I'm confused as to why. the guy who explained wasnt an auto elec, but he said he had seen it before.
so i drove home by only making right hands turns.


20170920_153619.jpg

Originally Posted by Eevo

Apparently using the left indicator will activate the trailers brakes. I'm confused as to why. the guy who explained wasnt an auto elec, but he said he had seen it before.
so i drove home by only making right hands turns.

You probably have a round 7 pin trailer plug that has jumpers to run the old 5 pin plugs too. Just remove the jumpers and keep the 7 pin pattern.

Originally Posted by bee utey

You probably have a round 7 pin trailer plug that has jumpers to run the old 5 pin plugs too. Just remove the jumpers and keep the 7 pin pattern.

yes i have round 7 pin. was installed last week from the rectangular one.

what kind of jumpers are we talking about?

Ah Excellent !
Looks like a belter , give it a test sleep then go on an adventure .

The wiring issue issue will be something simple , run a multimeter over your plug to check .

Happy Camping ⛺️

This is standard - will be doing a couple tomorrow ......

Originally Posted by Rextheute

This is standard - will be doing a couple tomorrow ......

i think its wired like that cause everything else works.

brake lights, indicators and parking lights all work.

Originally Posted by Rextheute

This is standard - will be doing a couple tomorrow ......

Large round is different. See this page for 5 and 7 pin large round plugs:

Wiring Diagrams - Products - Narva

Note where the two plugs put the indicators, so some installers fit wire jumpers to both sets of pins. A barmy system but easy to fix.

Originally Posted by bee utey

Large round is different. See this page for 5 and 7 pin large round plugs:

Wiring Diagrams - Products - Narva

Note where the two plugs put the indicators, so some installers fit wire jumpers to both sets of pins. A barmy system but easy to fix.

Ah yes , ooooppppppps - ignore me !