Thread: Front Prop Shaft Disaster

Should be able to get one sent from Jeep Connection to there - it might have to come down on the greyhound. I did mine about 6 months ago. Mine was $600.

Consider yourself lucky you just lost that, not more….

Can you limp to Darwin in RWD?

Thanks but I can not even drive in rear wheel drive as this has no Diff Lock on it
wish I could!! Will try Jeep Connection have you got a contact number or details on them?

Email: Sales@jeepkonection.com.au
Phone: (03) 8795 7525

I got my Tom Woods one through them- around $600.




Suttons in Alice might get one on the northbound Greyhound? You'd pay a bit more probably, but weigh that up against the Daly Waters beer prices…

Or try this one http://www.aulro.com/afvb/d3-d4-rrs/...ml#post2178679

Originally Posted by keato58

Hi All
Well my Disco series 2 TD5 2002 has just thrown the front prop shaft out of at all places Daly Waters NT. Shaft is one hell of a mess picked it up of the road CVs fell to bits. Does any one know where in the NT I can get a used or rebuilt one as the new one is $000s.

Sorry to hear but Daly waters is a nice place for this to happen great pub

Keato58
Attached is a foto of the T/F case front output Flange
just above to the right is The CDL spigot
if you have the shaft you have the CDL
with your shaft out you should be able to feel or see the spigot
it takes a 10mm open ender to activate the CDL
pull the spanner towards the R/H chassis rail to engage gear
hope you get this snippet before closing time
cheers
Paul

Originally Posted by Modelsp

Keato58
Attached is a foto of the T/F case front output Flange
just above to the right is The CDL spigot
if you have the shaft you have the CDL
with your shaft out you should be able to feel or see the spigot
it takes a 10mm open ender to activate the CDL
pull the spanner towards the R/H chassis rail to engage gear
hope you get this snippet before closing time
cheers
Paul

Hi Paul, a 2002 model won't have the CDL internals unless it has been retrofitted.
Cheers

I have a front shaft in the shed that need rebuilding if that helps,probably quicker to get one from jeep connection though.send me a pm if i can help

How does this happen on a well oiled rig between services , what are our mechanics doing , just changing the oil ?
Sorry about your grief Mate , it could have been much worse