Nick and I working on new and improved battery tray to whack a 2nd optima right next to the one I have in original spot now...:-)
Printable View
Nick and I working on new and improved battery tray to whack a 2nd optima right next to the one I have in original spot now...:-)
Your just teasing us all now Kerry:pQuote:
Originally Posted by Railey
Quote:
Originally Posted by rangieman
You have the same one! We're just going to make one like it... :D
Reminds me i best go check and see if there is a tray under my battery`s:eek:;)Quote:
Originally Posted by Railey
Gave mine an oil change..... no big deal.
But found this lurking on the manifold
Hmm, AC clutch?
Sent from my HTC One using AULRO mobile app
Yeah, should go back in all ok. The retaining bolt is long gone - reckon i'll be using some loctite on reassemble : )Quote:
Originally Posted by Disco Muppet
Some decent dings in the fan blades, just dumb luck that belts / other stuff didn't get shredded and it got spat out on top not lost to the road.
Well today after the disco was on an hoist the SLS wont inflate back up to normal ride hight, i heard the compressor for an bit thats it..
I assume you still have the shims that go behind the clutch - ensure you install them before bolting the clutch back on the A/C shaft.Quote:
Originally Posted by 697-Nodad
Cloughy
replaced the suspension arms on the Disco the old rubbers were stuffed on the rear, picked up a set with good rubbers.
Replaced rear wiper motor need to get a new arm for it.