Thread: What happened to your Discovery 2 today?

The simple answer is YES.

Originally Posted by gusthedog

Got a link?

And get rid of those security nuts before they leave you stranded

Go to wish.com it’s an App you need to download- search for Land Rover wheel center. There are heaps of designs(I guessing matching to various LR models). $20 including postage. Took 2 weeks to arrive.
And the nuts are gone! But I ordered new caps from the UK and that’s what turned up! My bad!

Originally Posted by JR1

Go to wish.com it’s an App you need to download- search for Land Rover wheel center. There are heaps of designs(I guessing matching to various LR models). $20 including postage. Took 2 weeks to arrive.
And the nuts are gone! But I ordered new caps from the UK and that’s what turned up! My bad!

Ah then if they aren't security nuts, they are spare wheel nuts. Always get confused with the two dimple types on D2 wheels. Spare wheel nuts are not designed for holding a rotating wheel - they only have half the thread of a standard nut. Plenty of thread for holding a spare on the door. Not enough to hold a wheel on a hub though. You should probably replace them with standard nuts.

Originally Posted by gusthedog

.... Spare wheel nuts are not designed for holding a rotating wheel - they only have half the thread of a standard nut. Plenty of thread for holding a spare on the door. Not enough to hold a wheel on a hub though .....

I'm sure mine fitted the other way around.
The spare wheel nuts had thread all the way from the tapered end right through it to the front end of the nut. This allows it to fit on the spare wheel holder's longer thread.

Can't fit the road wheel nuts onto the spare carrier and tighten the wheel up, as the threads top out within the nut ... which is tapped only about half way into the nut.

Right then. Carry on.

Originally Posted by AK83

I'm sure mine fitted the other way around.
The spare wheel nuts had thread all the way from the tapered end right through it to the front end of the nut. This allows it to fit on the spare wheel holder's longer thread.

Can't fit the road wheel nuts onto the spare carrier and tighten the wheel up, as the threads top out within the nut ... which is tapped only about half way into the nut.

285k oil and spin on filter. Gave the air filter a bash to get the dust out. Need to order a water pump and fill service kit from Mario.

Well finally did sevice and wheel rotation, then thought I have a spare hub sitting here I'l change out the right front hub, so after 3 hours stuff in around, spare hub got throne out of the shed in a huf and original one put back on, so I just live with the the 3 Spanish buggers till I get motivated again, one bolt hole was damaged so I couldn't get bolt started .

Originally Posted by rangieman

Money for Jam

Yes! I agree, do it yourself if you can (but of course not easy if you’re carrying an injury) but generally speaking for all readers in my experience having to deal with a seized caliper slide pin was the only difficulty encountered.