What happened to your Discovery 2 today?

Quote:

---

Originally Posted by PhilipA

Well yes, but my gaiter has the steel spring thingo on it which I think I switched from the original.

When pushing it back in, the switch support panel slipped below the rim on the console. The only way to retrieve it was to undo the whole panel. The mounting point next to the hand brake is completely missing from Gorillas.

Anyway, I was able to support it a bit better as I drilled the face plate and screwed into the existing raised holes which made the under panel a bit more rigid. All the pins on mine were gone so I used my soldering iron to place holes in the centre of the bosses in the face plate then drilled holes exactly in the centre of the remaining bit of the bosses after I had cut them off flush..
Regards Philip A

---

Mine was not that much different as it had been worked on by Chimpanzees at some time.

Quote:

---

Originally Posted by Pippin

Mine was not that much different as it had been worked on by Chimpanzees at some time.

---

One of these?

Attachment 142967

Quote:

---

Originally Posted by Bohica

One of these?

Attachment 142967

---

Yes thats them!

Managed 10km/L driving Sydney to Brisbane!! I always thought other owners were lying. I did take the roof rack off for the drive.

Quote:

---

Originally Posted by JR1

Managed 10km/L driving Sydney to Brisbane!! I always thought other owners were lying. I did take the roof rack off for the drive.

---

Why so bad? [biggrin] belting along at 110kph?

I took one of these of to replace the globe. The lens was covered with green muddy goop. I think it is the copper parts that have corroded mixed with fine dust that has leaked in from a damaged gasket.

Fun times on Saturday removing the rear door card etc to replace the gasket.

Quote:

---

Originally Posted by Bohica

I took one of these of to replace the globe. The lens was covered with green muddy goop. I think it is the copper parts that have corroded mixed with fine dust that has leaked in from a damaged gasket.

Fun times on Saturday removing the rear door card etc to replace the gasket.

---

Julian ,a few pics of the job would be good to help others. The rear door gasket is notorius for failing thus ruining the number plate light.

Quote:

---

Originally Posted by Roverlord off road spares

Julian ,a few pics of the job would be good to help others. The rear door gasket is notorius for failing thus ruining the number plate light.

---

aint that the truth...

relying on one atm,,,[bighmmm]

stupid design.. stupid.

Quote:

---

Originally Posted by Roverlord off road spares

Julian ,a few pics of the job would be good to help others. The rear door gasket is notorius for failing thus ruining the number plate light.

---

Quote:

---

Originally Posted by Pedro_The_Swift

aint that the truth...

relying on one atm,,,[bighmmm]

stupid design.. stupid.

---

Oh great, another D2 joy I've yet to experience....:no2::lol2::lol2:

lots more for you!!

do you want them listed alphabetically or biggest $$ first?

[bigrolf]