What happened to your Discovery 2 today?
		
		
				
				
					
				
		
			
				
					
	
		
			
			
				
					
 Originally Posted by 
RRT
					 
				 
				Having tried so many phone holders and such over the years, had always admired the RAM mount system, so today I installed one! Had measured the length from the edge of the dash panel above the centre console but this turns out to be too thin for attachment so had to go behind the rubber indent. Screwing into this required a drill attachment due to the angle of the windscreen but very happy with the positioning. The ram mount is an 18.5" and although the track is relatively cheap around $20, the ram balls to mount onto the track themselves are not. Other attachments -extension arms and attachment balls with 1/4" camera mount - are available else where by the way such as ebay and alibaba but the track ones are RAM. 
20220622_105408.jpg
20220622_105518.jpg
ram mount.jpg
Now just waiting on the attachments!
 
	 
 You have given me an idea - I was considering a floor mount. ATM I have a RAM suction mount that I use for my iPad that is used for mapping applications. It’s been great so far but I’ve found that very hot sun on the glass will negatively affect the suction strength and the mounts can suddenly let go . I do have a screw down round base that I can utilize but hadn’t yet explored if there was anything substantial beneath the dash cushion to attach to - the base will sit nicely beside the Mud Pod
. I do have a screw down round base that I can utilize but hadn’t yet explored if there was anything substantial beneath the dash cushion to attach to - the base will sit nicely beside the Mud Pod l might bring it forward to beside the pod.
 l might bring it forward to beside the pod.
 
				
			 
			
		 
			
				
			
			
				LROCV member #131 
1999 build D2 TD5 Auto, Mantec snorkel, 2" LRA spring lift, ARB on board air, Ashcroft ATB, CMM air ram CDL shifter, swag & gold pans ....
			
			
		 
	
Bookmarks