Thread: What happened to your Discovery 2 today?

Originally Posted by AK83

How, where and (if you don't mind me asking) how much?

Brother wants one for his D2.
Can't find any way to contact this mob.

Info would be appreciated and passed on to bro.

Found details in thread on forum.
Emailed him on monday, reply tuesday, EFT wednesday, unit arrived via express post friday.
Fast service, very happy.
there is a good install thread by Slunnie somewhere.
Details below.

---------- Forwarded message ---------
From: hunter di <hunterdispares@yahoo.com.au>
Date: Tue, 9 May 2017 at 2:00 PM
Subject: Re: C6100 ratio unit
To: Me



Hi Adam

Yes, this interface unit call C6100 ratio interface

The unit total cost $176 including freight to anywhere in Australia .

please pay EFT.

My bank details

Hunter Di spares

St George bank

BSB ######

A/C #######

Many thanks

Hunter

finished dissembling the engine.

20170513_153313.jpg


anyone know if this part comes out? seems solid

20170513_153728.jpg

Originally Posted by Eevo

finished dissembling the engine.

20170513_153313.jpg


anyone know if this part comes out? seems solid

20170513_153728.jpg

Looks like it's permanent to me

The car went to Autobarn this arvo to get the PAC SWI installed. It's so nice to have the steering wheel controls working.

Originally Posted by Railey

Looks like it's permanent to me

Stays put. The difference between gems and thor blocks is that bracket is in a different orientation and is used for mounting the crank angle sensor to.

Changed rear diff oil and hub to axle 'o' ring today. Hope that stops the leak.

Originally Posted by Bluetoes

Changed rear diff oil and hub to axle 'o' ring today. Hope that stops the leak.

does the axle just pull out once you have unbolted the hub

Unblocked my rear diff breather pipe.

Also finally got around to extending the air con drain tubes. Doing the passenger side with the TC in was a bit of a challenge. Luckily I have small hands and skinny arms