Reply With QuoteAnd yer you have multiple torque wrenches.Originally Posted by Bohica
YarnMaster
SubscriberI like the visible use of 2 yes TWO axle stands. So much better than bricks or lumps of wood.Sagging front springs and shocks were removed last night after placing an online order for new ones..... measured 460mm from centre to wheel arch, and barely 30mm at bumpstop. Just sticking to standard height springs as I want at least one LR that fits in underground car parking.
The new Dobinsons should be here by next weekend to fit.
Discofender
D2a Td5 Manual, Chawton White. aka "Daisy"
Build date 11th Oct 2003
Freelander 2 2011, manual, the daughter calls it Perri
Before I had a Land Rover I did not have any torque wrenches. Now I have three.
LROCV #1410
LordRover
SubscriberAnd yer you have multiple torque wrenches.
JayTee
Nullus Anxietus
Cancer is gender blind.
2000 D2 TD5 Auto: Tins
1994 D1 300TDi Manual: Dave
1980 SIII Petrol Tray: Doris
OKApotamus #74
Nanocom, D2 TD5 only.
Master
About to order a new steel rear bumper… any ideas on how to install the reversing sensors….
Hole size, method etc.. ???
Super Moderator
Don't fit the reversing sensors, the bar interferes with them, rendering them useless.
If you don't like trucks, stop buying stuff.
Master
Are they still an axle stand if they are under the chassis......
LordRover
SubscriberDepends on how you define unsprung weight. But I just call them stands cos it’s simpler.
JayTee
Nullus Anxietus
Cancer is gender blind.
2000 D2 TD5 Auto: Tins
1994 D1 300TDi Manual: Dave
1980 SIII Petrol Tray: Doris
OKApotamus #74
Nanocom, D2 TD5 only.
Swaggie
How do we even know if they are standing and actually not laying down and getting wider?
Cheers
Slunnie
~ Discovery II Td5 ~ Discovery 3dr V8 ~ Series IIa 6cyl ute ~ Series II V8 ute ~
Fossicker
Supporterwent to replace the wastegate modulator after discovering mine had been bypassed, and got defeated by the right hand bolt securing it being rounded offwas getting dark and dinner was ready so will revisit later, always the smallest thing that defeats me lol
oh and had replaced expansion tank cap and bled the coolant after replacing factory coolant return hose with some 8mm coolant hose
Master
Rounded off a bolt head on the slave cylinder...... damn. Might have to drop the exhaust down pipe to give me some room to a torch on it....
YarnMaster
SubscriberAn easyout might workRounded off a bolt head on the slave cylinder...... damn. Might have to drop the exhaust down pipe to give me some room to a torch on it....
D2a Td5 Manual, Chawton White. aka "Daisy"
Build date 11th Oct 2003
Freelander 2 2011, manual, the daughter calls it Perri
Before I had a Land Rover I did not have any torque wrenches. Now I have three.
LROCV #1410
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks