Thread: One for the fridgies

Originally Posted by scarry

Sometimes you can use emery paper to clean up the terminal,or a small screwdriver.
Then squeeze up the spade so it slides on very tight.

Check the run cap is OK,if you have the correct meter.It doesn't have to be far out for the Amps to climb.

Thanks but over the years I have done all that. I suspect your spades are a heavier gauge from a proper manufacturer (Utilux) so will have a real go at finding some.

I still use my old school Utilux crimping pliers.

One of the gun chiller techs in Canberra knew exactly what they were when he saw them as he still used the same model.
Yes, he's as old as me....

I always wondered what Paul traded as?
Our young tech flicked this to me last night

They'd obviously have to test it in one's own home so that is convenient.



Talk about being Self-confident.

Originally Posted by rick130

I always wondered what Paul traded as?
Our young tech flicked this to me last night

Sorry rick,that isn't us,we aren't rated no1 by my mother

Originally Posted by scarry

Sorry rick,that isn't us,we aren't rated no1 by my mother

I suggest you have a word in her shell like then.

Here is one of our work vans,we don't have them sign written for obvious reasons

Originally Posted by scarry

Sorry rick,that isn't us,we aren't rated no1 by my mother

Originally Posted by scarry

Here is one of our work vans,we don't have them sign written for obvious reasons

Perfect for the inner city calls!