Page 3 of 6 FirstFirst 12345 ... LastLast
Results 21 to 30 of 59

Thread: 20" Nitto Terra Grapplers

  1. #21
    Join Date
    May 2010
    Location
    Brisbane, QLD, Australia
    Posts
    2,252
    Total Downloaded
    0
    Quote Originally Posted by chuck View Post
    I bought a set of Cooper LTZ's from a good friend that owns a tyre store.

    The price would indicate that they are parallel imports as they were more than $100 cheaper per tyre than Cooper Dealers.

    They are genuine & 2013 build.

    If the manufacturers were selling the product at a reasonable price then parallel imports would not exist.

    Same with BFG - can get genuine 265 65 18's for $360.00 ea fitted & balanced.

    Genuine BFG RRP is $588.00!!!!!!!!!!!!

    Hi Mate,


    I don't know .... there may be more than one way to save money on a tyre.


    I don't quite get 'Parallel Imports' anyway. Old stock, defective stock, somehow shifted through a 'side' network?


    Anyway, back to my point. A local Brisbane dealer that I know, does not use the local Pirelli distribution network and chooses to deal directly with a Sydney based dealer who imports from the OEMs. The savings are in the range of $200/tyre for high end tyres.


    All genuine, all current, just less middle men!


    Your tyres could fall into that category.


    Cheers,


    Kev.

  2. #22
    Join Date
    Mar 2010
    Location
    Brisbane
    Posts
    66
    Total Downloaded
    0

    Back to the Nitto's

    Hi Terry

    I fitted a set of these to my D4 in June just prior to our trip to Cooktown. Have now done over 5,500km and have to say I'm very pleased with them. As you have mentioned they are quite and responsive in their grip. As a sister brand of Toyo I think the compound used is softer than the american brand but I see that as a good thing.

    Most of my Km's have been highway with only a little bit of dirt road (10%). No mud yet - it's been a bit dry around here. We were fully loaded and there is no sign of chipping. They felt like a heavier tyre than the previous Pirelli Zeros but I haven't checked the weight. The side walls seem thicker - what do you think?

    I think the tread depth is probably a couple mm shallower than the Cooper LTZ but as you have said, for the price, they appear to be good.

  3. #23
    Join Date
    May 2010
    Location
    Brisbane, QLD, Australia
    Posts
    2,252
    Total Downloaded
    0
    Quote Originally Posted by time2 View Post
    Hi Terry

    I fitted a set of these to my D4 in June just prior to our trip to Cooktown. Have now done over 5,500km and have to say I'm very pleased with them. As you have mentioned they are quite and responsive in their grip. As a sister brand of Toyo I think the compound used is softer than the american brand but I see that as a good thing.

    Most of my Km's have been highway with only a little bit of dirt road (10%). No mud yet - it's been a bit dry around here. We were fully loaded and there is no sign of chipping. They felt like a heavier tyre than the previous Pirelli Zeros but I haven't checked the weight. The side walls seem thicker - what do you think?

    I think the tread depth is probably a couple mm shallower than the Cooper LTZ but as you have said, for the price, they appear to be good.

    Tread depth can be deceptive. I have 18" LTZs which look like they have heaps more tread depth than the 19" Scorpion ATRs I was running as road tyres. But on measuring there was bugger all in it. I think it was the space between the blocks that make the tread look deeper on the LTZs.

  4. #24
    Join Date
    Jul 2009
    Location
    Gold Coast
    Posts
    3,775
    Total Downloaded
    0
    Quote Originally Posted by time2 View Post
    Hi Terry

    Most of my Km's have been highway with only a little bit of dirt road (10%). No mud yet - it's been a bit dry around here. We were fully loaded and there is no sign of chipping. They felt like a heavier tyre than the previous Pirelli Zeros but I haven't checked the weight. The side walls seem thicker - what do you think?
    .
    hi Time2

    From what I can tell yes the side walls seam thicker than the OEM Pirelli's. Done nearly 1500 k's on the Nitto's, so far so good.
    Cheers,
    Terry

    D1 V8 (Gone)
    D2a HSE V8 (Gone)
    D3 HSE TDV6 (Unfortunately Gone)
    D4 V8

  5. #25
    Join Date
    May 2010
    Location
    Brisbane, QLD, Australia
    Posts
    2,252
    Total Downloaded
    0
    Quote Originally Posted by TerryO View Post
    hi Time2

    From what I can tell yes the side walls seam thicker than the OEM Pirelli's. Done nearly 1500 k's on the Nitto's, so far so good.

    Hi Terry,


    Have you had them in a decent downpour yet, on the road? How did they perform?


    As you have possibly gathered from some of my posts I've found the Scorpions (ATR) not quite as good in the wet as I would have liked.


    Cheers,


    Kev.

  6. #26
    Join Date
    Apr 2013
    Location
    Melbourne
    Posts
    41
    Total Downloaded
    0
    Hi Kev, from memory you had a scary aquaplaning moment on Pirellis? I have heard some people have a similar experiences in different car makes from the DSC kicking in while aquaplaning, turning the vehicle. Is that a possibility in your case?

  7. #27
    Join Date
    May 2010
    Location
    Brisbane, QLD, Australia
    Posts
    2,252
    Total Downloaded
    0
    Quote Originally Posted by catsman View Post
    Hi Kev, from memory you had a scary aquaplaning moment on Pirellis? I have heard some people have a similar experiences in different car makes from the DSC kicking in while aquaplaning, turning the vehicle. Is that a possibility in your case?

    Hi catsman,


    Yes that's correct. Pirelli ATRs.


    Are you thinking the reaction of the DSC caused the turn?


    I'm not sure, I actually thought the DSC saved my life (or at least a very bad day), as it helped me recover the car from the situation.


    At the time it seemed like the car just lifted in the water (lost contact with the road) and then I was aware of it turning, as in rotating. I was in a very slight turn, following the line of the road, at the time. I've been asked if I noticed a DSC or something light come on (In the dash) ... which I didn't, as I was looking directly at a concrete barrier.


    It was then (after the rotation) that I was aware of the TC or sub-sets of that (DSC) (or the other way round) kicking in .... you could literally feel and hear the car react, it was very obvious. It probably is DSC but I think these systems are very integrated ... but for the discussion let's just say DSC ('cause I wouldn't know otherwise :-)). I'm pretty certain that didn't occur until the car had turned/rotated. I kept my foot off the brake and accelerator but turned the car towards my intended direction of travel. The DSC kicked in at each change of direction, doing what I felt was reducing the aggressiveness of the slide. In other words, each slide was tighter helping straighten the car. It appeared obvious to me that I was going to be OK after the first correction as I could feel the car quickly coming under control. It was very quick and there were only three corrections (getting smaller each time). It is possible that my input was actually hindering the recovery to a small extent .... as in the OMFG overcorrect!


    I say the sequence is accurate with some conviction now as I've had the DSC react in the new D4 on a very slippery mud/gravel road at much lower speed (60kph and then 40 shortly afterwards). It was much quicker to react and recover than the older one ... or so it appeared. But the sensation was the same.....slide/rotate/recover. But once again, I'm certain the DSC didn't kick in until the car started turning. Even at 40kph I was well aware of the DSC kicking in.


    Maybe with a slighter turn you'd feel less DSC input. I don't know the system well enough to understand the inputs to the DSC but I'm guessing what the wheels are doing would be one thing but I'm certain that sway is somehow detected. Aircraft use gyros and accelerometers, etc to achieve this, not sure what a D4 does. However, there must be something and the existence of Trailer Stability Control would suggest that the car is aware of sway. I doubt the sway in this case (before the slide) would have been any greater than a slight turn in normal circumstances (on a dry road) but maybe the lack of wheel reference due to the aquaplane did trigger something?


    I was thinking the tyres bit in a fraction after the aquaplane (which would have induced a rotation due to the curved road) causing an aggressive change in direction. I'm certain the car was sliding up the road sideways but was still heading towards the wall. Heading towards the wall is a given as my car completely changed lanes, but I'm sure it was still sliding sideways as well. Does that make sense?


    I don't want to pooh pooh the ATRs as I thought they were a great tyre originally. Very strong and capable....punching way above their weight off-road too. But I've read a few very similar stories now about them. Obviously if you were driving muddies or slicks you'd expect a traction issue in the wet but what really scared me was the lack of warning.....one sec beautiful, next sec ... OMFG. On tight corners (roundabouts) I felt they were a bit skittish in the wet but wasn't overly concerned until this occurred.


    The extremity of the circumstances could have been circumstantial but since now driving on OEM Wranglers again with the new D4, I'm not aware of any issues in the wet.


    It might just be the fact that I got the crap scared out of me but I don't think I'd buy them again. In all honesty if it had just been my experience I'd probably force myself to overcome that lack of confidence but since reading more reports, I'll be looking for alternates when the Wranglers are done. I think there are a lot of guys on this forum running Scorpion ATRs, so if they are not reporting a trend maybe it just has been circumstance for a few drivers ... it happens.


    You'd think the DSC is designed to do what it I think it did and since the cars would have been tested in the UK, you'd assume rain would have been taken into consideration .... wouldn't you?


    Not sure if that helped.


    Cheers,


    Kev.

  8. #28
    Join Date
    Jul 2009
    Location
    Gold Coast
    Posts
    3,775
    Total Downloaded
    0
    So far the Nitto's are pretty good, not exceptional though. In heavy rain they can track a bit if there is a lot of surface water.

    Not at all unhappy I bought them, especially at that price. Don't know what they are like off road yet though.
    Cheers,
    Terry

    D1 V8 (Gone)
    D2a HSE V8 (Gone)
    D3 HSE TDV6 (Unfortunately Gone)
    D4 V8

  9. #29
    Join Date
    Apr 2012
    Location
    Orange, NSW
    Posts
    7,965
    Total Downloaded
    0
    Kev.
    Not D3/D4 related but I've been running Pirellis for the last 45k kms on my D2, including in some torrential downpours and I've never had it step out at all.
    Keep in mind I'm still a green P plater (until 3pm today ) so I like to drive enthusiastically
    Not sure if the different systems/tyre size on a later model disco would have an impact on how they go in the wet.
    The Phantom - Oslo Blue 2001 Td5 SE.
    Half dead but will live again!

    Nina - Chawton White 2003 Td5 S
    Slowly being improved

    Quote Originally Posted by Judo View Post
    You worry me sometimes Muppet!!


  10. #30
    SBD4's Avatar
    SBD4 is offline A Keeper of the TGO Gold Subscriber
    Join Date
    Dec 2011
    Location
    Bundeena
    Posts
    2,809
    Total Downloaded
    0
    Quote Originally Posted by Celtoid View Post
    Hi catsman,


    Yes that's correct. Pirelli ATRs.


    Are you thinking the reaction of the DSC caused the turn?


    I'm not sure, I actually thought the DSC saved my life (or at least a very bad day), as it helped me recover the car from the situation.


    At the time it seemed like the car just lifted in the water (lost contact with the road) and then I was aware of it turning, as in rotating. I was in a very slight turn, following the line of the road, at the time. I've been asked if I noticed a DSC or something light come on (In the dash) ... which I didn't, as I was looking directly at a concrete barrier.


    It was then (after the rotation) that I was aware of the TC or sub-sets of that (DSC) (or the other way round) kicking in .... you could literally feel and hear the car react, it was very obvious. It probably is DSC but I think these systems are very integrated ... but for the discussion let's just say DSC ('cause I wouldn't know otherwise :-)). I'm pretty certain that didn't occur until the car had turned/rotated. I kept my foot off the brake and accelerator but turned the car towards my intended direction of travel. The DSC kicked in at each change of direction, doing what I felt was reducing the aggressiveness of the slide. In other words, each slide was tighter helping straighten the car. It appeared obvious to me that I was going to be OK after the first correction as I could feel the car quickly coming under control. It was very quick and there were only three corrections (getting smaller each time). It is possible that my input was actually hindering the recovery to a small extent .... as in the OMFG overcorrect!


    I say the sequence is accurate with some conviction now as I've had the DSC react in the new D4 on a very slippery mud/gravel road at much lower speed (60kph and then 40 shortly afterwards). It was much quicker to react and recover than the older one ... or so it appeared. But the sensation was the same.....slide/rotate/recover. But once again, I'm certain the DSC didn't kick in until the car started turning. Even at 40kph I was well aware of the DSC kicking in.


    Maybe with a slighter turn you'd feel less DSC input. I don't know the system well enough to understand the inputs to the DSC but I'm guessing what the wheels are doing would be one thing but I'm certain that sway is somehow detected. Aircraft use gyros and accelerometers, etc to achieve this, not sure what a D4 does. However, there must be something and the existence of Trailer Stability Control would suggest that the car is aware of sway. I doubt the sway in this case (before the slide) would have been any greater than a slight turn in normal circumstances (on a dry road) but maybe the lack of wheel reference due to the aquaplane did trigger something?


    I was thinking the tyres bit in a fraction after the aquaplane (which would have induced a rotation due to the curved road) causing an aggressive change in direction. I'm certain the car was sliding up the road sideways but was still heading towards the wall. Heading towards the wall is a given as my car completely changed lanes, but I'm sure it was still sliding sideways as well. Does that make sense?


    I don't want to pooh pooh the ATRs as I thought they were a great tyre originally. Very strong and capable....punching way above their weight off-road too. But I've read a few very similar stories now about them. Obviously if you were driving muddies or slicks you'd expect a traction issue in the wet but what really scared me was the lack of warning.....one sec beautiful, next sec ... OMFG. On tight corners (roundabouts) I felt they were a bit skittish in the wet but wasn't overly concerned until this occurred.


    The extremity of the circumstances could have been circumstantial but since now driving on OEM Wranglers again with the new D4, I'm not aware of any issues in the wet.


    It might just be the fact that I got the crap scared out of me but I don't think I'd buy them again. In all honesty if it had just been my experience I'd probably force myself to overcome that lack of confidence but since reading more reports, I'll be looking for alternates when the Wranglers are done. I think there are a lot of guys on this forum running Scorpion ATRs, so if they are not reporting a trend maybe it just has been circumstance for a few drivers ... it happens.


    You'd think the DSC is designed to do what it I think it did and since the cars would have been tested in the UK, you'd assume rain would have been taken into consideration .... wouldn't you?


    Not sure if that helped.


    Cheers,


    Kev.
    out of interest, do you recall what tyre pressures you were running at the time?
    Cheers,

    Sean

    “Only two things are infinite, the universe and human stupidity, and I'm not sure about the former.” - Albert Einstein

Page 3 of 6 FirstFirst 12345 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!