Thread: What happened to your D3/D4 today?

Originally Posted by josh.huber

Looks cool Spence, is the panel just glued on?

G’day Josh, the panel is attached using UHB (ultra high bond) tape. I got it from a solar shop in Rowville Victoria. This stuff is pretty serious. I did 150 on the freeway this weekend... this panel will not come off.

This morning I wired up the panel. Fitted the remote push to talk for the GME radio, and also the microphone.

Originally Posted by PerthDisco

If you follow the cliffs down to False Entrance and exit from there it is one of the great circuit trips you’ll ever do.

We did a short version of this by going down to Nor6 and back across to Ranger Station. Bit short on time to do the whole lot down to False Entrance by the time we got off the DHI barge and up to Steep Point etc.

Scott

Came home from a weekend's camping (Fri lunch to Sun lunch) at the Banyan Tree Caravan and Tourist Park just outside Litchfield National Park. The rubbernecker's are about earlier this year. Mostly Victorian's at this stage.

And today it took me to my place of new employment.

Originally Posted by Eric SDV6SE

That will make the bugs stick to it for sure. Try Raptor coatings, works way better than 2 stroke oil. Its a plastic paint, leaves a hammer/spatter finish, supertough and looks good imho.

Great idea mate!
Does the plastic trim require a plastic primer prior to spraying on the Raptor paint? At close to $90 a can I'd like to get this right the first time.......

Installed Rhinorack platform & awning. Went with the slightly narrower platform than what is stated as the straight fit for the Disco on the Rhinorack website.
IMG_3663.jpgIMG_3776.jpg

Originally Posted by LukeO

Installed Rhinorack platform & awning. Went with the slightly narrower platform than what is stated as the straight fit for the Disco on the Rhinorack website.
IMG_3663.jpgIMG_3776.jpg

The narrower version looks so much cleaner than the overhanging one.