Page 244 of 633 FirstFirst ... 144194234242243244245246254294344 ... LastLast
Results 2,431 to 2,440 of 6328

Thread: What happened to your D3/D4 today?

  1. 3rd July 2021, 05:06 PM #2431
    PerthDisco's Avatar
    PerthDisco
    PerthDisco is offline ChatterBox Subscriber
    Join Date
    Oct 2012
    Location
    Perth
    Posts
    2,700
    Total Downloaded
    0
    Quote Originally Posted by loanrangie View Post
    I've been planning a storage solution for a while but finally made a start last weekend, originally bought 13m of 13x13/1.8mm SHS but to get the rigidity i needed it wasn't enough.
    I cut up an old roofrack that a mate and i went halves in years that was made of 20mm SHS and used that as the base frame then made the top frame and uprights from the 13mm, top only needs to support some camping gear and is more than adequate.
    I made a fridge slide years ago from 25mm alloy with plastic connectors and gal rod so i built the frame around it, fridge will be on the right and on the left i'll be making a chuck box style kitchen box from plywood that will be on a slide but fully removable.
    This is a nice it of kit

    How to build a slide out drawer / DIY / Land Rover Discovery 3 / LR3 LR4 - YouTube
    Reply With Quote Reply With Quote
  2. 3rd July 2021, 05:21 PM #2432
    cripesamighty's Avatar
    cripesamighty
    cripesamighty is offline ChatterBox Silver Subscriber
    Join Date
    Aug 2008
    Location
    Perth, WA
    Posts
    2,479
    Total Downloaded
    37.36 MB
    Just trying to keep on top of everything, so while it went in for it's 534,000km service, it had a few things done at the same time.
    Replaced faulty tailgate latch
    Bought and programmed a spare key
    Replaced the worn rear sway bar bushes
    Replaced the rear tail shaft as the centre bearing was knackered.

    It now drives like a new car again. Going to take it up to Lancelin tomorrow with a few mates so that should clean out the cobwebs!
    Life is just a series of obstacles preventing you from taking a nap.
    Reply With Quote Reply With Quote
  3. 3rd July 2021, 05:52 PM #2433
    PerthDisco's Avatar
    PerthDisco
    PerthDisco is offline ChatterBox Subscriber
    Join Date
    Oct 2012
    Location
    Perth
    Posts
    2,700
    Total Downloaded
    0

    What happened to your D3/D4 today?

    Quote Originally Posted by cripesamighty View Post
    Just trying to keep on top of everything, so while it went in for it's 534,000km service, it had a few things done at the same time.
    Replaced faulty tailgate latch
    Bought and programmed a spare key
    Replaced the worn rear sway bar bushes
    Replaced the rear tail shaft as the centre bearing was knackered.

    It now drives like a new car again. Going to take it up to Lancelin tomorrow with a few mates so that should clean out the cobwebs!
    Sensational!

    I see Advanced Factors now offer a complete control arm replacement kit.
    Reply With Quote Reply With Quote
  4. 3rd July 2021, 07:07 PM #2434
    loanrangie's Avatar
    loanrangie
    loanrangie is offline LordRover Subscriber
    Join Date
    Jan 1970
    Location
    St Helena,Melbourne
    Posts
    16,770
    Total Downloaded
    1.13 MB
    Quote Originally Posted by PerthDisco View Post
    This is a nice it of kit

    How to build a slide out drawer / DIY / Land Rover Discovery 3 / LR3 LR4 - YouTube
    Yeah not very practical though.
    MY08 TDV6 SE D3- permagrin ooh yeah
    2004 Jayco Freedom tin tent
    1998 Triumph Daytona T595
    1974 VW Kombi bus
    1958 Holden FC special sedan
    Reply With Quote Reply With Quote
  5. 4th July 2021, 03:56 PM #2435
    gavinwibrow's Avatar
    gavinwibrow
    gavinwibrow is offline YarnMaster Silver Subscriber
    Join Date
    Oct 2011
    Location
    Fremantle WA
    Posts
    3,838
    Total Downloaded
    0

    Spare Wheel Winder Mod

    Did the 3/4" slotted and bolted socket mod onto the spare wheel winder.

    Only trouble is that between my 3rd row seats there's not enough room to fit the 1/4" extension bar.

    I suppose I could cut out a section of the "offending" plastic covers, but don't plan to.

    Does anyone know if the separation between the seats is adjustable enough to slide the extension in between? I never planned to leave the extension in situ, but only to fit and use it as needed.
    D4 MY16 TDV6 - Cambo towing magic, Traxide Batteries, X Lifter, GAP ID Tool, Snorkel, Mitch Hitch, Clearview Mirrors, F&R Dashcams, CB
    RRC MY95 LSE Vogue Softdash "Bessie" with MY99 TD5 and 4HP24 transplants
    SADLY SOLD MY04 D2a TD5 auto and MY10 D4 2.7 both with lots of goodies
    Reply With Quote Reply With Quote
  6. 4th July 2021, 04:08 PM #2436
    SimmAus's Avatar
    SimmAus
    SimmAus is offline Master Subscriber
    Join Date
    Jan 2012
    Location
    Sydney
    Posts
    450
    Total Downloaded
    0
    Quote Originally Posted by gavinwibrow View Post
    Did the 3/4" slotted and bolted socket mod onto the spare wheel winder.

    Only trouble is that between my 3rd row seats there's not enough room to fit the 1/4" extension bar.

    I suppose I could cut out a section of the "offending" plastic covers, but don't plan to.

    Does anyone know if the separation between the seats is adjustable enough to slide the extension in between? I never planned to leave the extension in situ, but only to fit and use it as needed.
    Just remove the plastic covers…come off quite easily, and you really don’t notice without the covers.
    Reply With Quote Reply With Quote
  7. 4th July 2021, 04:54 PM #2437
    stuarth44
    stuarth44 is offline Master
    Join Date
    Jul 2019
    Location
    buderim
    Posts
    187
    Total Downloaded
    0

    lr time

    Quote Originally Posted by PerthDisco View Post
    This is a nice it of kit

    How to build a slide out drawer / DIY / Land Rover Discovery 3 / LR3 LR4 - YouTube
    How to build a slide out drawer / DIY / Land Rover Discovery 3 / LR3 LR4 - YouTube
    Reply With Quote Reply With Quote
  8. 4th July 2021, 05:55 PM #2438
    PerthDisco's Avatar
    PerthDisco
    PerthDisco is offline ChatterBox Subscriber
    Join Date
    Oct 2012
    Location
    Perth
    Posts
    2,700
    Total Downloaded
    0
    Quote Originally Posted by stuarth44 View Post
    How to build a slide out drawer / DIY / Land Rover Discovery 3 / LR3 LR4 - YouTube
    One large simple full size slide for fridge and variety of stow boxes is quite appealing. Access to the space under for other storage
    Reply With Quote Reply With Quote
  9. 4th July 2021, 06:43 PM #2439
    Tombie's Avatar
    Tombie
    Tombie is offline OldBushie
    Join Date
    Apr 2012
    Location
    Whyalla, SA
    Posts
    7,545
    Total Downloaded
    0
    Towed 3 trailers of concrete and steel to the dump.

    Bloody hell it takes a bit to empty by hand!!!
    Reply With Quote Reply With Quote
  10. 4th July 2021, 07:18 PM #2440
    LRD414's Avatar
    LRD414
    LRD414 is offline Super Moderator Subscriber
    Join Date
    Oct 2014
    Location
    Brisbane
    Posts
    3,737
    Total Downloaded
    0
    Quote Originally Posted by Tombie View Post
    Towed 3 trailers of concrete and steel to the dump.
    I was hoping to see a D4 road train with 3 trailers in tow. Disappointed
    D4 TDV6 MY14 with Llams, Tuffant Wheels, Traxide DBS, APT sliders & protection plates, Prospeed Winch Mount w/ Carbon 12K, Mitch Hitch & Drifta Drawers
    Link to my D4 Build Thread
    D3 2005 V8 Petrol
    Ex '77 RRC 2 door. Long gone but not forgotten.
    Reply With Quote Reply With Quote
Page 244 of 633 FirstFirst ... 144194234242243244245246254294344 ... LastLast
« Protecting pets in D4 while parked | Engine oil temp sensor »

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!