What happened to your D3/D4 today?

Over the weekend my air suspension compressor decided enough was enough and quit on me (electrically it died). Had a spare unit with a failed piston seal so made up one good unit from the two

Quote:

---

Originally Posted by Moggymitch

Swapped the Hankook AT’s with the Maxxis 980‘s.

Had a good run of about 65k kms and would have bought Hankook’s again but got a better price on the Maxxis which also have the LT rating. A Central Australia trip away for the school holidays with a van prompted the replacement, otherwise I might of squeezed another 5k kms out of them.

Also kept one of the old tyres as a 6th spare, just in case.

---

Did the same a couple of weeks back. Replaced GG AT3 which had done 70k ish.
Also kept the least worst one as the extra spare.

Finding the Maxxis noisy but starting to ignore it.

Quote:

---

Originally Posted by jwb

Did the same a couple of weeks back. Replaced GG AT3 which had done 70k ish.
Also kept the least worst one as the extra spare.

Finding the Maxxis noisy but starting to ignore it.

---

The Maxxis were the noisiest tyre I’ve tried on the Disco. Much happier with the Duratrac I’ve moved to.

Was able to buff out most of the damage to the front bumper inflicted by an unknown hit and run ***** in the local Woolies car park.

Quote:

---

Originally Posted by RHS58

Was able to buff out most of the damage to the front bumper inflicted by an unknown hit and run ***** in the local Woolies car park.

---

My P Plater son thought he would scrape my perfect condition front bumper corner against a rendered brick wall reversing out of our carport. Unfortunately the raw black plastic of the D3 bumper does not allow for easy repair options. I tried filing down the cheese grater effect on the plastic with limited success. Oh the pain is real.

Quote:

---

Originally Posted by PerthDisco

My P Plater son thought he would scrape my perfect condition front bumper corner against a rendered brick wall reversing out of our carport. Unfortunately the raw black plastic of the D3 bumper does not allow for easy repair options. I tried filing down the cheese grater effect on the plastic with limited success. Oh the pain is real.

---

I’ve heard that gentle use of a heat gun is useful in this situation. Softens and smooths out the abrasions.

Quote:

---

Originally Posted by BMKal

A decent tub inside and out over the weekend, and its annual polish.

Still comes up pretty good for an 11 year old vehicle. :BigThumb:

---

all the clear coat had faded on the roof of mine, needs to go into have some love re-applied at some point including new roof liner.

Anyone recommend a good roof re-iner in Brisbane / Sunshine coast?

Drove it for the first time in nearly 3 weeks.

Finished replacing the upper tailgate actuator and lock. Also added emergency release cable. [smilebigeye]

Went away on the weekend to Big and Little Deserts. Had the same problem again where under full power trying to climb a sand hill the car gets to a seriously challenging spot and just dies on me. Starting to think it might have something to do with the ERG deletes and the remap I had done. Any ideas/thoughts welcome. Never had this problem before they were done. Otherwise it goes like a scolded cat and tows the van effortlessly.