Thread: What happened to your D3/D4 today?

Originally Posted by drivesafe

I think it is about time I made a video, to show how all the setting work.

This would probably make it easier for each owner to setup the way that best suits their individual needs.

For Traxide users with an in-cab module here’s a little summary that I made up to help remember how to select the various settings. I have the USI-160 which has 4 modes (Share, Ignition, Winch and Jump Start). Noting the orientation of the in-cab module in the picture, if the switch is down Share mode is selected and if the switch is up Ignition mode is selected. Winch mode (when car is running) and Jump Start mode (when car is off) can be selected by toggling the switch (upwards and downwards) in specific combinations then leaving it in the upwards position. Both Winch and Jump Start modes will automatically revert back to Ignition mode.

Ignition mode (Storage mode) turns off both relays thereby isolating the cranking and auxiliary batteries. Ignition mode is great for conserving power when you don’t plan to drive the car very much. If you do drive the car, while ignition mode is selected, both relays will turn on when the voltage reaches 13.1V thereby connecting and charging both batteries.

Hope this helps someone, Tim please let me know if I’ve misunderstood anything.

Cheers
Dean
In-Cab Guide.jpg

Replaced the upper and lower front suspension arms, both hubs and tie rod ends with genuine. Did not realise how worn it all was until I went for a drive and the difference was amazing, no rattle over loose surfaces and it just felt tight as new.

A few people have asked me about the microphone mount that someone has 3d printed for me. Here’s some pics. Let me know if you’re interested and I’ll give you his details.

After almost 9 yrs,we saw ours for the last time.
Sold to a forum member,interstate.

First time in 21 yrs,we don’t have a Disco as a daily.

LR don’t produce a new vehicle that suits us ATM.
The Defender didn’t really suit,we will have another look at it in a few years time.

Got a new case for one of the key fobs. Swapped it over after a bit of hesitation when the PCB didn't come out that easily. I just wasn't being brutal enough. Might have to do the other one in the next couple of months as well. Bought the shell off ebay, $17 I think it was.

Originally Posted by scarry

After almost 9 yrs,we saw ours for the last time.
Sold to a forum member,interstate.

First time in 21 yrs,we don’t have a Disco as a daily.

LR don’t produce a new vehicle that suits us ATM.
The Defender didn’t really suit,we will have another look at it in a few years time.

That's sad!

Originally Posted by scarry

After almost 9 yrs,we saw ours for the last time.
Sold to a forum member,interstate.

First time in 21 yrs,we don’t have a Disco as a daily.

LR don’t produce a new vehicle that suits us ATM.
The Defender didn’t really suit,we will have another look at it in a few years time.

So what did you end up buying?

Originally Posted by John_D4

A few people have asked me about the microphone mount that someone has 3d printed for me. Here’s some pics. Let me know if you’re interested and I’ll give you his details.

Why didn’t you just attach the stock mount with 3M tape?