So how should i plumb my S3 with out one.
Poms dont seem to need one.
Sure my Rego guy wouldn't know what should be fitted.
Thanks.
whitehillbilly
Painting finished
Heater fitted.
Tight 90 elbow bend for heater switch. Any after market part that may fit ????
1/2 inch heater pipe.
Thanks
whitehillbilly
So how should i plumb my S3 with out one.
Poms dont seem to need one.
Sure my Rego guy wouldn't know what should be fitted.
Thanks.
whitehillbilly
Bit more work.
To Do.
Front rear drive shafts.
Clutch peddle, then bleed clutch.
Booster Brake, then bleed brakes.
Fuel tank and fuel lines.
Loom and wire up everything.
Exhaust.
![]()
Thanks.
Super winch overdrive bits arrived from DingoCroft.
Order sent 30/4. 9 Days from UK
whitehillbilly
Chatting to Gromit about which window to fix the rubber to.
So fitted to the sliding window.
PITA to get on was his comment.
Tried a few time, failing to fit, so decided to widen slightly, using screwdriver.
Can always close it up again.
Firm but tapped on easier.
whitehillbilly
Looking great![]()
88 Perentie FFR - Club Rego
93 Discovery 1 200 Tdi - Club Rego
03 130 Td5 Single Cab
06 Discovery 3 Petrol
22 Defender 90 - Full rego
Fitted Gilberts wiper arms and blades, manually moving them, one goes up, one goes down.
Set wiper controllers as per the manual, and still get it wrong.
But can see I have the LH one, the wrong way up !!!!
whitehillbilly
Shane, sounds like the wipers are correct, with the passenger side, the cable runs across the top of the wiper box, but on the driver side it runs underneath the wiper box so they move in opposite direction. When parked, both blades should be pointing towards the centre of the window.
Cheers,
John
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks