Page 11 of 12 FirstFirst ... 9101112 LastLast
Results 101 to 110 of 118

Thread: Diesel Tuning Chip for Land Rover Discovery 4

  1. #101
    Join Date
    Sep 2007
    Location
    Kiwiland
    Posts
    7,246
    Total Downloaded
    0
    Quote Originally Posted by garrycol View Post
    Dougal you think you are God's gift to all things diesel and you made the statement that any competent tuner could do this work.
    Oh yawn. Where did I lay claim to being gods gift to diesel?

    Diesel tuners throughout europe on every other EDC17 vehicle have been shutting down EGR and DPF's for about 4 years now. It is a perfectly reasonable question to ask if any of those tuners successful on other vehicles have tried the EDC17 landrovers.

    You seem to have issue with this extremely valid question. Try finding the answer instead of attacking the person asking it.

    How about this question:
    Quote Originally Posted by Dougal View Post
    So you know for certain that the EGR switches have been tried and either failed or are non-existant in the 3.0sdv6 EDC17 ECU?
    It is the crux of the issue.

  2. #102
    Homestar's Avatar
    Homestar is offline Super Moderator & CA manager Subscriber
    Join Date
    Aug 2010
    Location
    Sunbury, VIC
    Posts
    20,105
    Total Downloaded
    0
    Quote Originally Posted by Dougal View Post
    Oh yawn. Where did I lay claim to being gods gift to diesel?
    He didn't say you did, just said you seem to think you are. If the cap fits...
    If you need to contact me please email homestarrunnerau@gmail.com - thanks - Gav.

  3. #103
    Join Date
    Jan 1970
    Location
    Canberra
    Posts
    18,616
    Total Downloaded
    0
    Quote Originally Posted by Dougal View Post
    You seem to have issue with this extremely valid question. Try finding the answer instead of attacking the person asking it.
    You made the statement, in effect that any competent tuner can do this process - you did not ask the question. I asked the question that if that was the case why haven't these competent tuners been able to do this with the 3.0TDV6 Diesels (and indeed the later 2.7s).

    See this is typical - you make statements and claims that many on here question but you do not seem to be able to back them up when asked.

    Garry
    REMLR 243

    2007 Range Rover Sport TDV6
    1977 FC 101
    1976 Jaguar XJ12C
    1973 Haflinger AP700
    1971 Jaguar V12 E-Type Series 3 Roadster
    1957 Series 1 88"
    1957 Series 1 88" Station Wagon

  4. #104
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,036
    Total Downloaded
    0
    Here's a link to a company that provides an EGR disable software module to reprogram ecus that includes the 3.0 used in LRs:
    https://www.vcpowerteam.com/products...emoval-module/

    Here's a link to a company that makes devices to retrieve and load ecu programs that includes the 3.0 used in LRs:
    BOSCH MEDC17 TRICORE IROM/XROM BOOT-MODE WITH LOCKED MICROPROCESSOR

    Here's a link to a company that provide a DPF removal update to the 3.0 used in Jags so I would expect they could just as easily provide EGR removal as indicated in the first link:
    Jaguar XF 3.0d DPF Removal / Delete & ECU Remap | Avon Tuning

    I'm convinced that EGR can be disabled on the 3.0 and its just a matter of seeing if someone in Oz has the software and equipment to do it. My previously-mentioned son is now investigating.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa

  5. #105
    Join Date
    Mar 2008
    Location
    Sydney, Australia
    Posts
    2,351
    Total Downloaded
    0
    It is a good question then why Pete Bell has not been able to do it.
    It would appear that VC power says it can be done just with software but Avon tuning it appears that they remove the core of the EGR valves first before altering the software, which would explain the solution some came up with for >MY07 D3s by removing the EGRS but leaving them in the engine bay. It would seem to be that they have been able to remove the software bit and were still left with fault codes as the ECU would still sense the EGR motors not working?

  6. #106
    Join Date
    Sep 2007
    Location
    Kiwiland
    Posts
    7,246
    Total Downloaded
    0
    Quote Originally Posted by Dougal View Post
    So you know for certain that the EGR switches have been tried and either failed or are non-existant in the 3.0sdv6 EDC17 ECU?
    Quote Originally Posted by garrycol View Post
    You made the statement, in effect that any competent tuner can do this process - you did not ask the question. I asked the question that if that was the case why haven't these competent tuners been able to do this with the 3.0TDV6 Diesels (and indeed the later 2.7s).

    See this is typical - you make statements and claims that many on here question but you do not seem to be able to back them up when asked.

    Garry
    So in a nutshell.
    You have no idea what your favourite tuners may or may not have tried or even if they know about these switches. But now it's all my fault.

    Makes perfect sense.

    Wife: It's dark in here, turn on on the light.
    SDV6 owner: There is no light.
    Wife: It's there on the ceiling.
    SDV6 owner: It can't be turned on.
    Wife: The switch is on the wall behind the curtain.
    SDV6 owner: It's not possible.
    Wife: It was there last time and worked perfectly.
    SDV6 owner: You think you're gods gift to light switches. I'm telling you, it's not possible.

  7. #107
    Join Date
    Jan 1970
    Location
    Ellendale Tasmania.
    Posts
    12,986
    Total Downloaded
    0
    Quote Originally Posted by Graeme View Post
    Here's a link to a company that provides an EGR disable software module to reprogram ecus that includes the 3.0 used in LRs:
    https://www.vcpowerteam.com/products...emoval-module/

    Here's a link to a company that makes devices to retrieve and load ecu programs that includes the 3.0 used in LRs:
    BOSCH MEDC17 TRICORE IROM/XROM BOOT-MODE WITH LOCKED MICROPROCESSOR

    Here's a link to a company that provide a DPF removal update to the 3.0 used in Jags so I would expect they could just as easily provide EGR removal as indicated in the first link:
    Jaguar XF 3.0d DPF Removal / Delete & ECU Remap | Avon Tuning

    I'm convinced that EGR can be disabled on the 3.0 and its just a matter of seeing if someone in Oz has the software and equipment to do it. My previously-mentioned son is now investigating.
    I just sent AVON a message regarding the 2.7l 2011MY, the other 2 only do the 3.0l and I think I have emailed them before about this, I missed AVON on my previous searches and they are a UK based company, dunno how I missed them.

    Can your son inquire about the 2.7l also Graeme, please.

    Baz.
    Cheers Baz.

    2011 Discovery 4 SE 2.7L
    1990 Perentie FFR EX Aust Army
    1967 Series IIa 109 (Farm Truck)
    2007 BMW R1200GS
    1979 BMW R80/7
    1983 BMW R100TIC Ex ACT Police
    1994 Yamaha XT225 Serow

  8. #108
    Join Date
    Jan 1970
    Location
    Canberra
    Posts
    18,616
    Total Downloaded
    0
    Quote Originally Posted by Dougal View Post
    So in a nutshell.
    So Graeme provided some of the answers to the questions I asked in response to your statement. Even then there only seems to be one that is directly related to EGRs on the TDV6 3.0 and there is not a lot of detail.

    Thanks Graeme
    REMLR 243

    2007 Range Rover Sport TDV6
    1977 FC 101
    1976 Jaguar XJ12C
    1973 Haflinger AP700
    1971 Jaguar V12 E-Type Series 3 Roadster
    1957 Series 1 88"
    1957 Series 1 88" Station Wagon

  9. #109
    Join Date
    Apr 2002
    Location
    Godwin Beach 4511
    Posts
    20,689
    Total Downloaded
    32.38 MB
    will you people please stop playing the person and get back to discussing the issue.
    2007 Discovery 3 SE7 TDV6 2.7
    2012 SZ Territory TX 2.7 TDCi

    "Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
    "If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
    'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
    “What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
    "We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
    "The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius

  10. #110
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,036
    Total Downloaded
    0
    VCPowerTeam list LandRover EGR disablement for Siemens SID20X ecus and further down lists EGR disablement for Peugeot's 2.7 using Siemens SID201. I don't know what ecu the D3 2.7 uses nor what ecu the D4 2.7 uses but if its one of the Siemens 20X series it would mean EGR can be disabled on any D3/4 2.7.

    The gutting of the component innards for the Jag is that of the DPF (not the EGR valves) so that it can't blocked by particulates after DPF monitoring and cleaning disablement.

    I'd like to find more about the necessity of probing an ecu pin on one or more versions of the locked EDC17 ecus, specifically if its required for my 3.0 and therefore what ecu pin and what voltage, eg 3V, 5V, ground etc.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa

Page 11 of 12 FirstFirst ... 9101112 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!