Thread: Isuzu MSA Gearbox to LT230

Excellent work! Very tempted...

Originally Posted by rovercare

This looks to be an awseome conversion!, do you have more pics? how you made the shifterey bits, those gear ratio's are great.....wishing I didn't have 2 tapered roller LT95's to consume

Nice work

If you need I will consume a LT95 for you! I dont know about the gearing with a 5 speed, I think 2000rpm is too slow, I'm off turbo boost at those revs no good when heavy towing, which is what I use mine for

Originally Posted by landrover dave

If you need I will consume a LT95 for you! I dont know about the gearing with a 5 speed, I think 2000rpm is too slow, I'm off turbo boost at those revs no good when heavy towing, which is what I use mine for

Fit a lower ratio transfer box. There is really no downside to having more gears, especially when it's a stronger box with a wider range.

This looks to be an awseome conversion!, do you have more pics? how you made the shifterey bits, those gear ratio's are great.....wishing I didn't have 2 tapered roller LT95's to consume

Nice work

All the shiftery bits are at the electroplaters right now so the best I can do is this;

Boxobits.jpg

I have GarrySeries3's gearbox, so will post pics of his build up as it progresses.

GarrySeries3's gearbox........

GarrySeries3.jpg

Take out the Neutral Switch and replace with plug screw for clearance.

4.jpg



5.jpg

Remove Side Selector Arm.

1.jpg


Replace with new Side Selector Arm

7.jpg


Trim of protruding shaft (again for clearance).

8.jpg

Trim off main selector arm.

9.jpg

2.jpg


Weld on new arm and grind top side for clearance.

3.jpg