Reply With QuoteStarted fitting the new harmonic balancer today, had to remove the radiator as the torque wrench wouldnt fit. Good fun
20190406_134445.jpg20190406_134457.jpg
ForumSage
SubscriberMy transfer case did not leak a drop to around 180,000. I.was beginning to wonder if I had actually purchased a Land Rover...
Cheers
Master
Started fitting the new harmonic balancer today, had to remove the radiator as the torque wrench wouldnt fit. Good fun
20190406_134445.jpg20190406_134457.jpg
Cheers tt
D2 2004 TD5 Classic
--------------------------------------
Moderator
That is a serious tension wrench!Originally Posted by thai_tiger
Started fitting the new harmonic balancer today, had to remove the radiator as the torque wrench wouldnt fit. Good fun
20190406_134445.jpg20190406_134457.jpg
I thought I'd never say this, but I'm currently experiencing tension wrench envy!
Master
Yep shes a cracker, ive never needed one for such high torque before and probably never again. There's one coming up for auction if your interested was going for it but this one came up.
Ross's Auctioneers & Valuers
its no 23
Cheers tt
D2 2004 TD5 Classic
--------------------------------------
YarnMaster
SubscriberI finally replaced one of the the rego lights today.
What a pain. I used an easy out thing to remove the three torx screws that hold the dooe latch in place. They came out with the drill part of the easy out. Removing the lock mechanism was a royal pain in the arse. More of that later. I removed the lighting harness and took that indoors for some solder and spade connector love. Trying to fit the sealing gasket!!! I think I need to revisit that as it is not quite on properly.
As for the lights, one is LED the other is incandescent. I have looked for the LED but....
Trying to get the latch back in. Had a good look. The screw that holds the rego plate gets in the way. I loosened the screw and the latch went in smoothly.
As I was doing this I locked the rear door and had to clamber over the rear seats. I went to fold the rear seat fowards and broke then that plastic bit you lift to unlatch the seat. I Yiy Yiy!!!
Any way the door is back together and the lights all work. Go me!!
D2a Td5 Manual, Chawton White. aka "Daisy"
Build date 11th Oct 2003
Freelander 2 2011, manual, the daughter calls it Perri
Before I had a Land Rover I did not have any torque wrenches. Now I have three.
LROCV #1410
Master
SupporterNew boots 2" lift next
Discovery D2a 2004 TD5 auto (current)
Discovery 1 V8 1996 manual (gone)
Various series Land Rovers before moving to OZ
Wizard
Nyce😎
Still a very good looking car despite being soooo old now.
Bullbar n winch after the lift?
OldBushie
SupporterI have never considered adding a Lift to my D2a and she has taken me over some pretty Gnarly tracks over the years
You only get one shot at life, Aim well
2004 D2 "S" V8 auto, with a few Mods gone
2007 79 Series Landcruiser V8 Ute, With a few Mods.
4.6m Quintrex boat
20' Jayco Expanda caravan gone
Master
SupporterYep that's the planNyce
Still a very good looking car despite being soooo old now.
Bullbar n winch after the lift?
Discovery D2a 2004 TD5 auto (current)
Discovery 1 V8 1996 manual (gone)
Various series Land Rovers before moving to OZ
Master
SupporterI've done some silly things in it with the road tyres on it and have always got home but as I intend on doing some more sillyer stuff in it I thought I would be better prepare myself. I have struggled with lack of clearance on some tracks and keen to explore moreI have never considered adding a Lift to my D2a and she has taken me over some pretty Gnarly tracks over the years
Discovery D2a 2004 TD5 auto (current)
Discovery 1 V8 1996 manual (gone)
Various series Land Rovers before moving to OZ
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks