Thread: Dubbo - gearbox repairs

Originally Posted by Yorkie

Alan, maybe it will be less but to be honest I would rather someone that knows what they are doing can work on it, dubbo is closed until Monday and I can have the car in a workshop by then being worked on, maybe I can get away with only bearings, will see. 1st to 4th is quiet and I have reverse so may not be so bad, will see.

Where is closed till Monday? Dubbo transmission services in Darling st was open when I drive past this afternoon?

From memory the R380 had an oil feed problem on 5th gear and the output shaft, the ashcroftfix and later the Landrover fix was to cross drill the gear so that oil could reach the shaft, as it would wear the shaft splines

Most of these gearboxes were rectified while the vehicles were under warranty in UK but maybe not in Aust.

Originally Posted by seano87

Where is closed till Monday? Dubbo transmission services in Darling st was open when I drive past this afternoon?

Spoke to him, alone at work and unable to assist, diff and gears also closed til monday, nrma mech I was given also suggested nothing available to be done until Monday and they would only source a recon box from syd/mel.

Just out of curiosity mate, what symptom did you arrive at that 5th gear is rattling and at fault?
Only asking because a bad front prop shaft can play this same game in filth gear when in resonance

Originally Posted by Flipper

Just out of curiosity mate, what symptom did you arrive at that 5th gear is rattling and at fault?
Only asking because a bad front prop shaft can play this same game in filth gear when in resonance

When driving upto 90kph all is quiet, change to fifth rattle rattle.

I got a new Ashcrofts R380 outright, with heavy duty bearing mod, plus new DMF & Clutch kit delivered to Sydney in 10 days flat, and the lot was about the same cost as just getting the R380 reconditioned locally.

Really the best option if you intend to do a lot of towing.

Originally Posted by goingbush

I got a new Ashcrofts R380 outright, with heavy duty bearing mod, plus new DMF & Clutch kit delivered to Sydney in 10 days flat, and the lot was about the same cost as just getting the R380 reconditioned locally.

Really the best option if you intend to do a lot of towing.

When I got mine done, Ashcrofts said they couldn't start one for me for about five days, then add time for shipping etc. My three options were exchange box from the Hunter, local reco of my box or Ashcrofts. All worked at almost the same price, but I needed it superquick, so went for the local reco. The 10 days you got, GoingBush, might have been when all the planets aligned and they had one in stock, when I asked they had none hence the wait.

Jeff

Speaking to modern motors dungog they know ashcrofts well and are supplying an equivalent reco box to what you would get from ashcroft, booked in for Monday unless I trade it over the weekend.