Serviced Rear Wheel Carriers
		
		
				
				
		
			
				
					My D4 has a long range fuel tank and the spare wheels (two of them) are carried on OL swing-away arms. The arms are  mounted on bearing supported stub axles, welded to the steel rear bumper. I cleaned out the old grease in the bearings and repacked them. 
The arms open very smoothly on their bearing mounts and they have the recoil and travel managed by a gas shock on each arm. You can get into the tailgate quite quickly with this set up, with just one hand.
When not set up for a trip away, I use just one rear spare, mounted on the passenger side. Using the passenger side aids visibility on the driver's side, through the lower tailgate window on that side. Also, when the tailgate is opened, the passenger side spare swings into the kerb and not into a lane of traffic. 
The number plate and pilot light is mounted on the swing away arm.
Best wishes,
Jeffoir
				
			 
			
		 
			
				
			
			
				98 Disco 1 V8 (Gone) Young family; so much fun..
00 Disco 2 V8 (Gone) Mrs Jeffoir's..
02 Disco 2 V8 (Gone) What a lovely exhaust note..
07 Disco 3 TDV6 Still going strong..
12 Disco 4 SDV6 Mrs Jeffoir's..
13 Disco 4 SDV6 Great days lie ahead Comrades..
			
			
		 
	
Bookmarks