Thread: Bundalenes Daughters 130 repair job

Originally Posted by samuelclarke

Looking very good! Not wrong about calling it albino though!

If you don't mind me asking, where did you get the crystal style lights?

I bought these lights from an Ebay seller "brightlightautoparts"
Factory 2/31 Amay Cres Ferntree Gully, Vic 3156
Phone Number 03-9758-1122

There are however many other competative sellers on Ebay. The ones we chose came without globes as we installed a HID upgrade

Erich

Originally Posted by dobbo

That is just awesome

Any pictures of the rear end now it is completed?


When are you leaving? Any chance of an eye ball of it before you go?

This was taken a few days ago. I will try to get some rear shots for you tomorrow.



We hope to leave early Saturday 21st November in 1 weeks time. There has already been some rain to the north west of Gapuwiyak. Will PM you tomorrow RE out movements in the next week.

Erich

Last few days we:

Completed the rear camera. We will probably remove the rear view mirror as it served little purpose




Leanne almost completed the tray cover - lower tie downs are still to be installed
We completed the tray, bolting on all the bits, pocket covers, flares, ...
Almost completed the painting
Completed the auxillary sill fuel tank installation and filled it with 65 litres - not completely full as I was checking for leaks - all good

Took the car back to the spring supplier as one of the rear springs popped out during flex testing. They had supplied too long shocks and replaced them with the correct ones there and then

We replaced the bushes in the front trailing arms and half way through replacing the front unis

Replaced the front pinion seal. Andrew found a good use for an EGR - the perfect size in diameter and width to install the seal.



Erich

The rear spring popping out is now fixed. We went back down to ultimate and they swapped the rear shocks for some 30mm shorter ones.



I found a solution to the wheels sticking out one side more than another. Instead of stuffing around with a custom one adjustable panhard, I just moved the mount on the diff over 6mm, which made it equeal on both sides.










pics of the rear pockets and flairs.



Finished at 11pm. Will be back tomorrow morning.

That thing is a work of art!!! Especially the tray!

A bit too "albino" for me, but I am sure I could live with it if it was a gift....

Like.

Want.

Absolutely top job, congrats to all concerned. There wouldn't be too many people who now have such a comprehensive record of their car being built, that's a bonus.
Another point that has not gone un-noticed, your daughter is a very lucky girl to have such a caring family, but then I guess she already knows that.

Cheers
Mick

Originally Posted by midal

:
Another point that has not gone un-noticed, your daughter is a very lucky girl to have such a caring family, but then I guess she already knows that.

Cheers
Mick

Yes, but there is more.



My nephews or Sharon's cousins is building a quad bike trailer, Land Rover wheels, shocks, .... which we will be towing up. Yes, we do have a close and caring family.

Erich