Page 5 of 51 FirstFirst ... 3456715 ... LastLast
Results 41 to 50 of 508

Thread: Bundalenes Daughters 130 repair job

  1. #41
    Join Date
    May 2008
    Location
    Horsley Park, Sydney
    Posts
    2,939
    Total Downloaded
    0
    bit like scrap heap challenge except your making something with more quality that will actually work [/QUOTE]


    Hope so

  2. #42
    Join Date
    Nov 2006
    Location
    narellan, sydney
    Posts
    1,131
    Total Downloaded
    0
    It will be white. The end. Land rovers werent meant to look clean. Changing the colour will add 1K and 2 weeks, which could be better spent doing other things.

    AND mr hoarder has some TD5 defender white paint laying around already.


    Tyres, BFG muds KM2s, looking at 305x70x16 (33x12x16). I'm buying 5 tyres, and the 6th one will be a 255x85 or similar (33x10x16), as we already have these.

    I will need to change the wheels to 16x8s aswell, and change the offset, to achieve full lock without scrubbing.

    I didnt realise that 16 inch tyres were about $50 more per tyre than the 15 inch equivalant. There goes the budget. 2.5k in wheels and tyres.....

    It was put to work today, delivering parcels. They are a handy thing these utes.





    Andy
    Attached Images Attached Images

  3. #43
    Narangga's Avatar
    Narangga is offline TopicToaster Silver Subscriber
    Join Date
    Jun 2008
    Location
    McMinns Lagoon NT
    Posts
    4,531
    Total Downloaded
    0
    Quote Originally Posted by andrew e View Post
    It will be white. The end. Land rovers werent meant to look clean. Changing the colour will add 1K and 2 weeks, which could be better spent doing other things.
    Ain't brotherly love grand!

    Understand completely and the only thing I have against white is the long term bauxite stain. Not that too many in Gapuwiyak would notice - especially on a Land Rover.
    Cheers, Dale
    PIC - It comes with the Territory

    'The D3' - 2006 TDV6 HSE
    2008 Kimberley Kamper Sports RV
    Previously Enjoyed:
    2002 Adventure Offroad Campers 'Cape York'
    2000 D2 Td5 - plus!
    1997 Defender 110 Wagon - fully carpeted

  4. #44
    Join Date
    Nov 2006
    Location
    narellan, sydney
    Posts
    1,131
    Total Downloaded
    0
    Quote Originally Posted by Stuuu View Post
    Ain't brotherly love grand!

    Understand completely and the only thing I have against white is the long term bauxite stain. Not that topo many in Gapuwiyak would notice - especially on a Land Rover.
    Reds for fire trucks.




    It will have the same type of paint treatment as dads silver car got. wheel arches, mirrors, grill, headlight surrounds, bullbar etc all colour coded. Windows will be a darker shade of tint.


    Andy
    Attached Images Attached Images

  5. #45
    Join Date
    Nov 2006
    Location
    narellan, sydney
    Posts
    1,131
    Total Downloaded
    0
    Quote Originally Posted by Shonky View Post
    So do I!
    You werent at pickles auction last friday by any chance? As i was driving out, a 2a army ambo was driving in.

    Andy

  6. #46
    Join Date
    May 2008
    Location
    Horsley Park, Sydney
    Posts
    2,939
    Total Downloaded
    0
    26th October - we both got quite a few hours at the project today

    Next stage - I am tidying up all panels and painting and Andrew is attacking the tray - back end of the 130.

    This is the right guard and will be replaced with another at hand.





    While removing the grill we noticed the A/C condensor missing most of it's fixing screws



    Bugger - broke the bonnet cable release screw. I ground away the screw without damaging the cable but will probably get a new one cable.




    Guards removed. This was a country car all it's life. Absolutely no rust in the firewall or anywhere on the whole vehicle



    The radiator, intercooler and A/C condensor are completely blocked with grass seeds and grit. We will remove the radiator and have it serviced at the radiator joint and clean up the rest


    Note the hose from the radiator to the radiator fill bottle - almost rubbed through. I wonder how many TD5's have come to grief because of this - a common problem with both Defenders and Discos



    Changing guard indicator hole size to suit the later indicators. These are 300TDi guard outers going onto a TD5.


    Sanding prior to hifill. Both front guards ready for hifill primer.


    Andrew cutting up our steel tray off a 110. The headboard had been removed and the tray shortened to fit the 130. We are cutting a well - storage compartment into the floor of the tray to hold the spare tyre and room for lot's more.





    The aluminium tray removed.


    Will be cutting an inspection hole through the tray for access to the fuel pump. It is amazing what conditions the TD5 fuel pumps are subjected to.


    Not much thought gone into the positioning of the fuel tank breather - to be re-routed elsewhere.


    Erich

  7. #47
    Join Date
    Mar 2008
    Location
    TBA
    Posts
    2,328
    Total Downloaded
    0
    Looking forward to the end product

    I don't mind a good bulidup thread

    Keep up the good work

  8. #48
    Join Date
    Nov 2006
    Location
    narellan, sydney
    Posts
    1,131
    Total Downloaded
    0
    Theres a bit missing now



    Has anyone seen polyair bags in the helper springs on a 130? i've never heard of it before. (yes the car needs a wash)



    I'm sinking the tyre into the tray. There is alot of wasted space in the middle under a tray, This will be well, accessed from the top. Its 1m wide, and the length of the tray. It will be enough room for the high lift jack and spares. Theres alot of other space under the tray which is normally wasted, i will try to fill every nook and cranny with storage.



    Andy

  9. #49
    Join Date
    Nov 2006
    Location
    narellan, sydney
    Posts
    1,131
    Total Downloaded
    0
    [QUOTE=dullbird;1079016]yeah but its harder when ours are 14000 miles awayQUOTE]

    I wish my sister was 14000kms away, then nene overland would be doing this build.


  10. #50
    Join Date
    Mar 2008
    Location
    TBA
    Posts
    2,328
    Total Downloaded
    0
    Hey Andrew

    Just a thought

    If you were to have a decent load on the tray and get a flat tyre, is there another way of getting at the tyre?

Page 5 of 51 FirstFirst ... 3456715 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!