Page 15 of 54 FirstFirst ... 5131415161725 ... LastLast
Results 141 to 150 of 540

Thread: starting series 1 restoration

  1. #141
    Join Date
    Sep 2008
    Location
    smurf village
    Posts
    8,332
    Total Downloaded
    0
    measured up all the pieces that i need to replace and put the rear cross member LHS wing on the computer it is nothing special but it is a start
    i dont know how good and clear this will come up but ill try this only a 2d net plan.next step is 3d

  2. #142
    Join Date
    Sep 2008
    Location
    smurf village
    Posts
    8,332
    Total Downloaded
    0
    a few more 2d drawings have exams on so i cant spend time on 3d stuff yet or making these better
    tub tab on rear crossmember

    gearbox crossmember(side on)

    shock absorber mount?

  3. #143
    Join Date
    Mar 2010
    Location
    South Africa
    Posts
    867
    Total Downloaded
    0
    I just want to say I'm hugely impressed with a 17 (now 18 almost) year old tackling something like this.

    I started at 16 with a Renault Dauphine and VW Beetles. No internet, no books, just trial and error. The learning curve is huge, but the sense of satisfaction is just as immense.

    Go for it, we're all out here supporting you.

  4. #144
    Join Date
    Sep 2008
    Location
    smurf village
    Posts
    8,332
    Total Downloaded
    0
    Quote Originally Posted by jakeslouw View Post
    I just want to say I'm hugely impressed with a 17 (now 18 almost) year old tackling something like this.

    I started at 16 with a Renault Dauphine and VW Beetles. No internet, no books, just trial and error. The learning curve is huge, but the sense of satisfaction is just as immense.

    Go for it, we're all out here supporting you.
    thanks man.im getting keener and keener.i just wish i started this project a few months earlier so i would know i would finish it for sure.i have exams this week and then next week ill be flat out like a lizard drinking trying to get all these made up,most of it i should be able to make from scrap but i think for the gearbox crossmember i will have to buy some.even though these drawings still need lots of work at least if you need to copy that all the dimensions are there.ordering parts for gearbox transfercase and diffs tomorrow arvo excited

  5. #145
    Join Date
    Sep 2008
    Location
    smurf village
    Posts
    8,332
    Total Downloaded
    0
    should be making up gearbox crossmember and wings next week,my aim is to have the chassis painted up by the end of the holidays.what spray equipment do you reccomend

  6. #146
    Join Date
    Sep 2008
    Location
    smurf village
    Posts
    8,332
    Total Downloaded
    0
    unfortunately my parts did not come in
    so instead i got started on the engine,not sure how good it is gonna be,if it no good my s3 engine is going in
    also dismantled another diff centre as the other one the carrier was not to crash hot but this one is good anyway some photos

  7. #147
    Join Date
    Sep 2008
    Location
    smurf village
    Posts
    8,332
    Total Downloaded
    0
    sorry about some of the photos quality















    i did a video as well but i have worked out how to get that up yet

  8. #148
    Join Date
    Sep 2008
    Location
    smurf village
    Posts
    8,332
    Total Downloaded
    0

  9. #149
    Join Date
    Sep 2008
    Location
    smurf village
    Posts
    8,332
    Total Downloaded
    0

  10. #150
    Join Date
    Sep 2008
    Location
    smurf village
    Posts
    8,332
    Total Downloaded
    0









Page 15 of 54 FirstFirst ... 5131415161725 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!