Thread: My 88" Series 3

Originally Posted by LandyAndy

Looking a million Tim.
You should contact a UK mag and get them to run a story on your build!!!!
Andrew

I have a friend in Tasmania who wrights for LRO Mag did the articles on the Royal Land Rover & the one with Arthur were he compared the S1 , Jeep & Austin Champ. Not sure he would fly to WA though. Air fairs may be more than what he gets payed for the article. I will ask him.

Originally Posted by LandyAndy

Looking a million Tim.
You should contact a UK mag and get them to run a story on your build!!!!
Andrew

Land Rover themselves would be interested in your build. It would fit very nicely and add interest to their "Reborn" project they are doing at the moment.


What tyres are those? They the sort of thing I'm looking for; mostly road use.

Peter.

Edit: looked back through your thread and found a good photo. They're GOODRIDE SL369 A/T.
what size did you use? I had a look at a couple of sellers; they seem to start at 205/65 width and go up from there. I had heard anything over 185/75 would give me clearance issues...

Hi Peter,

The tyres are 205/80 16's. (Should be the same as the stock 6.00 R16)

I stuck with this size for a number of reasons:

Looks "right" on a 88", (in my opinion anyway)
Running the ashcroft high ratio transfer kit so don't need the dia for speed
Not planning on using it as a hard core 4WD
Was cheaper for shipping the vehicle, (didn't bump it up into the next height class)

And thanks for the kind words everyone! Not sure it's magazine ready/worthy!

Cheers,

Edit, 80, not 18!

Originally Posted by whitehillbilly64

Hi Tim.
Looking great !!!!
Could you please take a measurement for me ?
What have you got between the two fuel tank mounts? Mine was cut off and I am thinking of putting one back.
Is the bracket the full height of the chassis rail.
Also what electronic dissy/parts did you fit.
Thanks

whitehillbilly

Hi whitehillbilly,

I missed your post for some reason, I'll get the measurements for you tomorrow. The dizzy is from Powerspark in the UK:

Land Rover 45D High Energy distributor, DLB198 Ignition Coil & 8mm HT leads Land Rover 45D High Energy Replacement distributor and DLB198 Ignition Coil to Match [D5 & CE5 & L2black] - PS92.99 : Electronic Ignition, Home of the Powerspark electronic ignition and electronic distributor

Cheers,

Thanks Tim.

whitehillbilly

Mmmmm shiny, sorted out the box of swag that came back from the platers:





Wish I had started doing this earlier, don't even need to have them that clean and they, (mostly), come back good as new. It amazes me how well springs plate also.

Cheers,

Originally Posted by whitehillbilly64

Thanks Tim.

whitehillbilly

Did you get my PM whitehillbilly?

Cheers,

Sorry.
Thought I had replied ?
Thank you.

Whitehillbilly.