Thread: Land Rover Series 3 100"

Commodore m/cyl is dual circuit, i was running otherwise standard rrc discs all round, the car was series2 body on rrc chassis. The brakes were excellent
defender booster will also do what you need

Sent from my ZTE T28 using Tapatalk 2

I think I'll crack out the measuring tape and head to the wreckers and see what I can find. Can anyone find a price on a Defender brake box and booster (new or secondhand) and possibly a Stage 1.

Originally Posted by Series3 GT

I think I'll crack out the measuring tape and head to the wreckers and see what I can find. Can anyone find a price on a Defender brake box and booster (new or secondhand) and possibly a Stage 1.

just what your after
http://www.ebay.co.uk/itm/Land-Rover...item3f1e58aa56


or 95 new
Land Rover Brake Pedal Box Assy Defender | eBay

Puma one with a Booster, but shipping will be high, better to find a booster here.
http://www.ebay.co.uk/itm/2009-LANDR...item2a1ed0b17c


someone local would have one, why dont you put an ad in the Wanted section

Thanks for the ebay finds, I think I'll have a look at the SIII cause i know that'll fit the easiest and will be the cheapest seeing as i'm on a low budget.

hi mate. just wondering what engineer you ended up using and how your getting on with the project. i have a few rangie bits if your ever chasing anything in albany.
cheers, Mat

Thanks for the offer, do you have a flywheel cover for the lt95 cause thats missing on mine. I've found a brake pedal box to suit the Series 3 with a booster setup but it doesn't have a booster but I can find one of then pretty easily. I haven't got an engineer yet but I'm probably going to have to go to Perth for the engineer but I just printed the modifiers application form today and I've been looking through it. It needs to be approved by the department of transport first then inspected by an engineer then it still has to go over the pits to be registered. Big process but fairly straight forward and I'm goin to contact the department tomorrow and see what else I need to do. I haven't done much with the vehicle since the last time but the next job is the rear crossmember and the front of rear tub mounts.

There are two or three versions of that cover you're looking for, and a couple of the bolts have a tapered shank, so make sure everything's right before you go to bolt the thing in place.

When I called the Department of Transport last year they said there was a two-month wait once you've sent your form in, so make sure you get onto it sooner rather than later.

I'll have to get more of the car together before I enter the form cause theres a few measurements that I need to complete the form. It seems fairly straight forward but I'm gonna give them a call soon and ask a few questions that might be the biggest struggle getting through to someone who knows what I'm talking about.