Reply With Quotepity your so far away Ida laid on the labour for ya.. still if you can get the tcase off and get it up this way and justinc can lay on the needed parts (assuming its the tcase)
Im happy to go the yards on it for ya
Swaggie
Kev,
It may be that the centre differential pinion(Side) gear/s and/or a cross shaft has broken, this will give NO drive, but may slightly load up one of the outputs, IE front shaft, slightly while the remaining bits are partially engaged. I would drop the bottom cover and see what comes out...
I can help with spares for this if you like, I have quite a few in bits if you need a donation to the LT230 fund!
Feel free to PM away...
JC
RoverLord
pity your so far away Ida laid on the labour for ya.. still if you can get the tcase off and get it up this way and justinc can lay on the needed parts (assuming its the tcase)
Im happy to go the yards on it for ya
Dave
"In a Landrover the other vehicle is your crumple zone."
For spelling call Rogets, for mechanicing call me.
Fozzy, 2.25D SIII Ex DCA Ute
TdiautoManual d1 (gave it to the Mupion)
Archaeoptersix 1990 6x6 dual cab(This things staying)
If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
If you think you're in front on the deal, pay it forwards.
Swaggie
Good plan Dave.Originally Posted by Blknight.aus
Let us know how you go Kevpics will help too if poss.
JC
YarnMaster
When my output shaft went, it went with a "BANG" followed by the "sickening crunching grinding noise....."
M
AT REST
G'day Folks
Into 1st. and let out the Clutch BANG clutch centre rivets let go, slight load on T/shaft as clutch tries to operate. have you had any clutch noises, or shudder or jerkiness ??
cheers
Master
UncleHo no clutch noise but i do remember 1 small shudder the other day but i thought it was just me been lazy...
I'm about to take the pto cover off and have a squiz inside the transfer case..
What still has me stumped is how easy i can select gears while car isnt running and with no clutch,normally i would have to jump in and press the clutch to get any gear!
ForumSage
I suspect the clutch has failed as well. I have seen it before and it is documented elswhere on the site. Fine one minute, no drive the next. The entire friction disc had fallen apart.
SysAdmin (Owner)
i have one as well, there are a few about, good ones are rare as rocking horse dung...
2007 Discovery 3 SE7 TDV6 2.7
2012 SZ Territory TX 2.7 TDCi
"Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
"If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
“What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
"We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
"The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius
Master
When i was looking around the one i have now was the only one i could find in Vic but there was a few around QLD.
I lucked out cause i had to have a 2dr and it had to be green!!!
At the time the were a lot of red and blue ones for sale up north and they were fetching a fair price
Swaggie
Any progress yet Kev??
JC
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks