Thread: TD5 AFM replaced

Originally Posted by McDisco

I read somewhere that it should read 45kg/hr on idle and up to 300 under load. If it reads 0 or doesnt change then it might be stuffed.

I really should check mine for this then...

Angus

Angus, should actually be 55 to 65Kg/Hr at idle, (Ensure engine is at operating temp etc and climate control OFF) and under load Td5 can be up to 650kg/hr.

300kg/hr is more like the V8. The V8 also runs at about 26 to 36 at idle.

JC

Justin

Oh right. I tested mine and it peaked in the high 3 hundreds under load. Would this mean that it is defective?

Angus

Originally Posted by McDisco

Justin

Oh right. I tested mine and it peaked in the high 3 hundreds under load. Would this mean that it is defective?

Angus

yup.

I have replaced a few like that with readings around 300 to 400. They specifically just feel flat, and won't seem to rev/ pull above 3500rpm easily.

JC

Thanks mate. Whats the damage on a new one?

Angus

Originally Posted by McDisco

Thanks mate. Whats the damage on a new one?

Angus

I have some serious brain fade after this last week and can't remember $$.
Try Stuart at Rovacraft for a price, MHK100620 is the part number I think.(I can remember THAT part)

He probably has plenty in stock.bloody Td5's.

JC

Had mine replaced recently,fuel economy was fine,but if you got the revs over 3000,the engine would surge,causing the auto to shift up& down gears quickly.This would generally only happen at over 80ks.

New MAF fixed it

Paul

How much?

Angus

Cant check for sure,as paperwork is in office,i think around$ 330 fitted,aftermarket,car was there for some other work & they did it at the same time.