Page 6 of 82 FirstFirst ... 456781656 ... LastLast
Results 51 to 60 of 818

Thread: Isuzu MSA Gearbox to LT230

  1. 31st March 2010, 02:00 PM #51
    SheldonA Guest
    Quote Originally Posted by Bush65 View Post
    I have a truck engine and 2 bolt, 24V starter that came with the engine. The starter is nothing like yours because it has an offset gear reduction - the motor offset causes the interference with the chassis rail.

    I have given consideration to rotating the starter but would probably weld the aluminium flange on the starter before (as Matt has done) welding/brazing studs to the cast iron flywheel housing.

    I would be interested to know what starter you have, as it could save me cutting my new (to me) chassis. Hmm, maybe the landie isuzu has a different tooth pitch on the ring gear and pinion may be incompatible

    Edit: BTW, I meant to add compliments for your work on the adaptors
    Details on starter motor;

    5-81100-164-0
    0-21000-4720
    24V 3.5KW
    Nikko Elec Ind Co Ltd
    Reply With Quote Reply With Quote
  2. 31st March 2010, 02:04 PM #52
    SheldonA Guest
    Ok just back from an extended 3 month holiday (should really get a real job...)

    Time to finish this little adaptor
    Reply With Quote Reply With Quote
  3. 4th April 2010, 09:40 AM #53
    SheldonA Guest
    Quote Originally Posted by the_grubb View Post
    Ok just back from an extended 3 month holiday (should really get a real job...)

    Time to finish this little adaptor
    Woops spoke to soon.... Bali tomorrow for 4 weeks.....
    Reply With Quote Reply With Quote
  4. 5th April 2010, 09:14 PM #54
    garryseries3
    garryseries3 is offline Master
    Join Date
    Mar 2008
    Location
    Torquay Victoria
    Posts
    376
    Total Downloaded
    0

    Truck Flywheel cover

    Quote Originally Posted by the_grubb View Post
    And Landrover flywheel cover to Isuzu box bell housing
    From the image there is a landy flywheel cover so does any one know is it going to possible to use the isuzu truck flywheel cover directly up to the isuzu bell housing insteed. Or will this alter some other component of the adaption?
    Garry
    Reply With Quote Reply With Quote
  5. 6th April 2010, 06:26 AM #55
    THE 109's Avatar
    THE 109
    THE 109 is offline Master Silver Subscriber
    Join Date
    Oct 2006
    Location
    gold coast,tweed heads
    Posts
    495
    Total Downloaded
    0
    Garry,
    If you use a truck flywheel housing the bellhousing will bolt straight up,you will need to use the truck flywheel and clutch too.That way it's all standard off the shelf items,the landy flywheel housing is 80mm as opposed to 105mm for the truck one.So it should end up the same length as the adapter shown.
    Cheers Eric
    Reply With Quote Reply With Quote
  6. 6th April 2010, 06:44 AM #56
    garryseries3
    garryseries3 is offline Master
    Join Date
    Mar 2008
    Location
    Torquay Victoria
    Posts
    376
    Total Downloaded
    0
    Quote Originally Posted by THE 109 View Post
    Garry,
    If you use a truck flywheel housing the bellhousing will bolt straight up,you will need to use the truck flywheel and clutch too.That way it's all standard off the shelf items,the landy flywheel housing is 80mm as opposed to 105mm for the truck one.So it should end up the same length as the adapter shown.
    Cheers Eric
    That sounds good so I will use the isuzu clutch folk and thrust bearing, so once grubb's adaptors are completed and I manage to buy one, I end up with the landy adaptor flywheel left over. What its worth for scap they are pretty heavy so should be worth a $ at the wreckers. Just joking, I am sure there is a good home out there for them and the isuzu lying in my the shed.
    Regards Garry
    Reply With Quote Reply With Quote
  7. 6th April 2010, 06:55 AM #57
    Dougal
    Dougal is offline ForumSage
    Join Date
    Sep 2007
    Location
    Kiwiland
    Posts
    7,246
    Total Downloaded
    0
    The Isuzu truck housing puts the starter motor lower. You may have chassis clearance issues.
    You may not, but it's worth checking.
    Reply With Quote Reply With Quote
  8. 11th June 2010, 06:16 PM #58
    SheldonA Guest
    Finally installed it all.

    Just need to finish bleeding the clutch, putting a new starter cable from the battery (I am using the Isuzu starter motor/flywheel cover for this one to make sure it is doable), putting the drive shafts back on and all the floor back in.

    Shift mechanism all fits under the standard tunnel except for one little piece. It actaully fits with a little trimming of the insulation in that area, but I plan to modify the bit so this isn't needed.

    Will finish it all next week after the long weekend.
    Reply With Quote Reply With Quote
  9. 15th June 2010, 08:53 PM #59
    kaa45's Avatar
    kaa45
    kaa45 is offline R.I.P.
    Join Date
    Apr 2007
    Location
    Clifton Springs, Vic.
    Posts
    841
    Total Downloaded
    0
    "getting excited, can't sit still, waiting, waiting......."
    Reply With Quote Reply With Quote
  10. 16th June 2010, 07:07 AM #60
    SheldonA Guest
    Took her for a spin this morning.

    All good, including 24V Starter Clearance with chassis.
    Reply With Quote Reply With Quote
Page 6 of 82 FirstFirst ... 456781656 ... LastLast
« Steering PAS Pump Heavy Steering | 4BD1T - auto conversion with 6R80?? »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!