Results 1 to 7 of 7

Thread: tyer size again

  1. 26th January 2011, 05:59 PM #1
    lawzy67
    lawzy67 is offline Fossicker
    Join Date
    May 2010
    Location
    hoppers crossing
    Posts
    22
    Total Downloaded
    0

    tyer size again

    guys can i fit235/85 R16.tyers to my disco 1 with out them rubbing
    Reply With Quote Reply With Quote
  2. 26th January 2011, 11:50 PM #2
    pistolpete's Avatar
    pistolpete
    pistolpete is offline Master
    Join Date
    Feb 2010
    Location
    Atwell, Western Australia
    Posts
    427
    Total Downloaded
    0
    all that information is within this section of the forum, you really need to use the search option

    http://www.aulro.com/afvb/discovery-...res-disco.html
    http://www.aulro.com/afvb/discovery-...es-fitted.html
    http://www.aulro.com/afvb/discovery-...size-link.html
    http://www.aulro.com/afvb/discovery-...-question.html
    http://www.aulro.com/afvb/discovery-...put-my-d1.html
    http://www.aulro.com/afvb/discovery-...hout-mods.html
    http://www.aulro.com/afvb/discovery-...iscovery1.html

    took more time to copy and paste the links than it did to do the search..
    Reply With Quote Reply With Quote
  3. 27th January 2011, 04:42 AM #3
    lawzy67
    lawzy67 is offline Fossicker
    Join Date
    May 2010
    Location
    hoppers crossing
    Posts
    22
    Total Downloaded
    0
    thanks for the links pete
    Reply With Quote Reply With Quote
  4. 27th January 2011, 07:11 AM #4
    welshrover Guest
    no they wont fit not without a 2"lift + and a camel cut .if your not sure what a camel cut is you have to cut out the rear of the rear wheel arch for the axle radius change when the suspension compresses into the wheel arch the same goes for the range rover classic to fit 235x85x16
    im not sure if you have to have a wheel with a different offset too
    hope this helps
    Reply With Quote Reply With Quote
  5. 27th January 2011, 11:42 AM #5
    pistolpete's Avatar
    pistolpete
    pistolpete is offline Master
    Join Date
    Feb 2010
    Location
    Atwell, Western Australia
    Posts
    427
    Total Downloaded
    0
    no you dont need wheel offset, just camel cut
    Reply With Quote Reply With Quote
  6. 27th January 2011, 12:21 PM #6
    Wongdai's Avatar
    Wongdai
    Wongdai is offline Master
    Join Date
    Oct 2010
    Location
    Perth
    Posts
    261
    Total Downloaded
    0
    I believe I have read somewhere that if you want to avoid the camel cut you can pull out the rear guard and insert a space between the guard and the bracket holding it. This is what I will be trying when I fit my 235/85's next month.
    Reply With Quote Reply With Quote
  7. 28th January 2011, 05:55 PM #7
    CircusFreaks Guest
    I've done a 2" lift and fitted them and the rears rub over bumps, just at the rear of the arch, I'm going to cut it back a bit.
    The fronts rub on the arms on full lock but otherwise are fine.
    Reply With Quote Reply With Quote
« Power Steering fluid leak | 2" lift question »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!