Page 11 of 41 FirstFirst ... 91011121321 ... LastLast
Results 101 to 110 of 408

Thread: The ultimate solution to Td5 vibration / knocking

  1. 24th August 2010, 04:04 PM #101
    haydent's Avatar
    haydent
    haydent is offline Wizard Supporter
    Join Date
    Jul 2009
    Location
    Mid North Coast, NSW
    Posts
    1,093
    Total Downloaded
    51.4 KB
    well believe it or not it looks like its the handbrake after all !!! what a relief. who would have thought it could make such a noise... i didnt.

    and this would explain why sometimes it would do it when stationary and others times not - i didnt always have the hand brake on !

    so yeah, when i pull the brake up a little while its happening it stops it.

    so i just took off the rear propshaft and the handbrake drum and put the transfer case into Diff-Lock with a 10mm spanner.

    so i can go for drive and bit by bit take the handbrake apart till i find what part is rattling...

    thanks so much for the help this has probably saved me hundreds of dollars that would have been spent in labour at the mechanic...

    im also really relieved it's nothing more serious as we only just upgraded to this model from an old '91 d1 and was getting worried...

    Reply With Quote Reply With Quote
  2. 24th August 2010, 04:55 PM #102
    haydent's Avatar
    haydent
    haydent is offline Wizard Supporter
    Join Date
    Jul 2009
    Location
    Mid North Coast, NSW
    Posts
    1,093
    Total Downloaded
    51.4 KB
    Quote Originally Posted by XHPBT1 View Post
    does the noise go away when the hand break is ON?
    so i just got back from a drive without the hand brake drum and rear prop shaft and it was the quietest ive ever heard it. not a peep. total silence.

    so i guess it must be the drum or the shoes ??

    do you know what it ended up being in your case or haven't you found out yet ?
    Reply With Quote Reply With Quote
  3. 24th August 2010, 06:01 PM #103
    XHPBT1's Avatar
    XHPBT1
    XHPBT1 is offline Master
    Join Date
    Jan 2009
    Location
    Australia, Brisbane
    Posts
    235
    Total Downloaded
    0
    Quote Originally Posted by XHPBT1 View Post
    I have had vibration on my D2, it was the Handbrake shoes vibrate like crazy, solution for mine was adjusting the handbrake to like 1 or 2 clicks........ its back to being a pleasure to drive...
    this is how i fix it every 5000km.... not sure what is vibrating like crazy in there...
    Reply With Quote Reply With Quote
  4. 25th August 2010, 04:08 PM #104
    haydent's Avatar
    haydent
    haydent is offline Wizard Supporter
    Join Date
    Jul 2009
    Location
    Mid North Coast, NSW
    Posts
    1,093
    Total Downloaded
    51.4 KB
    heres my report on my fix:
    http://www.aulro.com/afvb/discovery-...ml#post1318370
    Reply With Quote Reply With Quote
  5. 25th August 2010, 04:15 PM #105
    catch-22
    catch-22 is offline Wizard
    Join Date
    Jan 2007
    Location
    here
    Posts
    1,213
    Total Downloaded
    0
    good to see you fixed it but this thread is about the vibration common in Td5s and not a rattle. They are very different.
    Reply With Quote Reply With Quote
  6. 25th August 2010, 09:32 PM #106
    clubagreenie's Avatar
    clubagreenie
    clubagreenie is offline TopicToaster
    Join Date
    Dec 2007
    Location
    Sydney, you know. The olympic one.
    Posts
    4,853
    Total Downloaded
    0
    Try replacing the pins and springs that retain the shoes to the backing plate. I have used socket head cap screws (so you can get in there and hold it) large washer on back and then the spring as normal, another large washer and nut.
    Reply With Quote Reply With Quote
  7. 25th August 2010, 10:26 PM #107
    dutchviking
    dutchviking is offline Fossicker
    Join Date
    Jan 2010
    Location
    Oslo
    Posts
    82
    Total Downloaded
    0
    The park brake rattle is caused by the Td5 vibration, so it is related. I was prepping the D2 for its bi-annual MOT here in Norway and checked the bolts from the drive/flex plate to torque converter again, but they were tight. Reading on other forums makes me think it might be the big end bearings aka crankshaft bearings that might need replacement?
    Reply With Quote Reply With Quote
  8. 17th September 2010, 09:15 PM #108
    selfe Guest

    iv got a td5 and it vibrates

    my td5 vibrates at 2200 rpm and i had the front propshaft replaced and the two engine mounts what do i do next ?
    Reply With Quote Reply With Quote
  9. 17th September 2010, 09:28 PM #109
    haydent's Avatar
    haydent
    haydent is offline Wizard Supporter
    Join Date
    Jul 2009
    Location
    Mid North Coast, NSW
    Posts
    1,093
    Total Downloaded
    51.4 KB
    Quote Originally Posted by dutchviking View Post
    The park brake rattle is caused by the Td5 vibration, so it is related. I was prepping the D2 for its bi-annual MOT here in Norway and checked the bolts from the drive/flex plate to torque converter again, but they were tight. Reading on other forums makes me think it might be the big end bearings aka crankshaft bearings that might need replacement?
    ill agree with this, as now my rattle is fixed , there is still a noticible vibration at the same rpm, which i would think would have led to the brake shoe wear from excessive vibration.
    Reply With Quote Reply With Quote
  10. 17th September 2010, 10:21 PM #110
    selfe Guest

    re vibration

    iv had both engine mounts replaced and ront propshaft any one got any ideas because it still vibrates and 2200rpm
    Reply With Quote Reply With Quote
Page 11 of 41 FirstFirst ... 91011121321 ... LastLast
« D2 ‘stock’ ride height | Disco 2 Electric Windows Problem »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!