Now to work out what type of lift to get, with an ARB steel front bar and winch and a Terra Firma rear steel bar.
D2a Td5 Manual, Chawton White. aka "Daisy"
Build date 11th Oct 2003
Freelander 2 2011, manual, the daughter calls it Perri
Before I had a Land Rover I did not have any torque wrenches. Now I have three.
LROCV #1410
I am Sgt Shultz, I know nothing.
I'll have to look what spring rate and shock rate means! The car has LR shocks on the rear and red ones in the front.
I am looking at a lift, to fit taller tyres to avoid getting stuck so often. I got fed up with winching out. I could avoid those track, but then, where's the fun in that?
Spring rate, I think non linear for the rears.
There are a few 2 inch lift kits out there, but whether they are any good, or suitable, who knows.
I think of getting air springs, manual operated and a 2 inch spacer.
D2a Td5 Manual, Chawton White. aka "Daisy"
Build date 11th Oct 2003
Freelander 2 2011, manual, the daughter calls it Perri
Before I had a Land Rover I did not have any torque wrenches. Now I have three.
LROCV #1410
LRA in Thomastown, Victoria, did mine, and at their suggestion I packed my D2 as I would if I would be going away camping and delivered the loaded D2 to them and they “set it up” with the relevent spring rate to work with 2inch extended shocks that gave the desired vehicle stance and correct rake. I have since installed firestone airbags inside the rear springs.
LROCV member #131
1999 build D2 TD5 Auto, Mantec snorkel, 2" LRA spring lift, ARB on board air, Ashcroft ATB, CMM air ram CDL shifter, swag & gold pans ....
JayTee
Nullus Anxietus
Cancer is gender blind.
2000 D2 TD5 Auto: Tins
1994 D1 300TDi Manual: Dave
1980 SIII Petrol Tray: Doris
OKApotamus #74
Nanocom, D2 TD5 only.
JayTee
Nullus Anxietus
Cancer is gender blind.
2000 D2 TD5 Auto: Tins
1994 D1 300TDi Manual: Dave
1980 SIII Petrol Tray: Doris
OKApotamus #74
Nanocom, D2 TD5 only.
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks