Thread: What did you do on your Landy today?

Well yesterday I fitted the radiator hose sensor for my Engine Saver low coolant alarm, and finally bled the damn thing properly seems to be right now.
Today I finished the instal of the low coolant alarm, with a few odd hiccups.
I couldn't see the grommet on the firewall as:
a) I was looking for something totally different, and
b) my dual battery isolator was right on top of it!
So I removed that, then noticed that the wiring wasn't labelled so I traced the correct wires back, and then labelled them
After dicking around dropping various sockets in hard to reach places and my lack of a magnetic pick up, I fed the wire through the grommet, and tidied up the wire which I routed underneath the intake pipe, across underneath the second battery tray, and across the face of the firewall, and underneath the brake booster. All wiring covered with either split conduit tube or wiring shield.
Then the light was hooked up and the install finished up.
I also swapped over the accelerator pedal assembly, courtesy of my loaned pedal from JustinC, and with help from the man himself and Tombie in the removal and refit, thanks guys!
So I still have to remove my UHF and let TJM send it back to GME to be fixed under warranty, as well as move one antenna to the back door, and remove my broken one and get a new one!

Picked up the scrub guards for the lights on my 91RR from sandblasters today.Removed front grille for cleanup and new coat of paint.Unsure whether to powdercoat or paint or polish??
Any suggestions ??

Originally Posted by JDNSW

Finished installing the new radio in the 2a - and it works! Put the wheels back on and checked the tyre pressures and went for a test drive.

John

???? you removed the wheels to fit the radio??

Originally Posted by 85 county

???? you removed the wheels to fit the radio??

Doesn't everyone?

Lots and lots of wiring of the winch switch and dual battery controller...
working on this monstrosity in the deefer







More info in my build thread here

Stunned the expo with my killer flex



Working on that...

Steve223, MR LR, myself, and Slunnie



Was a good day, good to see some familiar faces and meet a few unfamiliar ones

Well on sunday I welded up some A frames, got horribly ill a couple hours later from breathing galv fumes. Thought I was gonna die. Any way I didnt. Today made the brackets up to mount the chassis onto A frames, now I have a rotisserie for the chassis. Looks good I think. Will try to add pics, not had much luck with this in the past......


What is wrong with this...says u need to login to attatch photos. I am bloody logged in. Please fix this moderators..

Cheers Rod

Sent from my GT-P5110 using AULRO mobile app[/SIZE]

Originally Posted by 67hardtop

Well on sunday I welded up some A frames, got horribly ill a couple hours later from breathing galv fumes. Thought I was gonna die. [/SIZE]

Do your lungs a favour and get a disposable activated charcoal P2 mask. Wear it so you don't die next time